"LAP" message, warning that the storage space for
lap times is full.
Note
The lap being counted on LAP deactivation is not
memorised and a new activation of the function starts
recording the times from the position following the
one of the last recorded lap.
If the time is never stopped, it will roll over upon
reaching 7 minutes, 59 seconds and 99 hundredths of
second; the lap timer starts counting from 0 (zero)
and will keep running until the recording function is
disabled.
Note
When the LAP function is active, the FLASH
button takes on the dual function of high beam flash.
214