Table of Contents
Advertisement
Centre stand
Always use the centre stand (1) to safely park the
motorcycle. Its structure ensures proper support of
the motorcycle even under full load.
Warning
Before lowering the centre stand, make sure
that the bearing surface is hard and flat.
Push with your right foot onto central stand bearing
surface (2), until it touches the ground; meanwhile
pull the motorcycle up and back.
To bring central stand at rest, just push motorcycle
forward, holding it at the handlebar, until the rear
wheel touches the ground. Stand will automatically
go back in place.
Warning
Before moving off, always make sure that the
central stand is at its rest position.
Check for proper operation of the stand mechanism
(two springs, one into the other) at regular intervals.
1
2
Fig. 253
1
Fig. 254
303
Advertisement
Table of Contents
