Ducati MULTISTRADA 1260S Owner's Manual page 123

You can use buttons (1), (2) and (4) to do the following:
- use buttons (1) and (2) to highlight and select the
riding mode to customise, then press button (4)
to access the customisation page for the
selected riding mode;
- use buttons (1) and (2) to highlight and select
" Back", then press button (4) to go back to
previous page;
- use buttons (1) and (2) to highlight and select "All
Default", press button (4) to reset to default
values for all four Riding Modes.
The parameters linked to a riding mode that can be
customised are ENGINE, DTC, ABS, DWC (active
only when the DTC function is not set to "OFF"), DQS,
Suspension, bike setup and DEFAULT (to reset to
default factory values for the riding mode). The
following indications will be displayed in this page:
-
Back
- Engine
- DTC
- ABS
- DWC
- DQS
- Suspension
122
Back
Engine
Sport
...
DTC
ABS
- Load Mode
- Default (visible only if one or more parameters
are different from the "default" ones)
- Back
Every time button (1) or button (2) is pressed, the
instrument panel allows scrolling all parameters of
the Riding Mode selected; once parameter is
highlighted, press button (4) to enter parameter
customisation page where you can edit the settings
of the parameter.
1
2 4
Fig. 53