Temporary Disabling Of Rating Level By Dvd Disc - Toshiba SD-46VSR Service Manual

Customizing the function settings
Setting details
Menu
êÛÒÒÍËÈ
Subtitle
êÛÒÒÍËÈ
Audio
êÛÒÒÍËÈ
/Setup/Return
Menu, Subtitle, Audio
You can select the language of "Menu", "Subtitle" and
"Audio" if more than one languages are recorded onto
the disc.
English, êÛÒÒÍËÈ:
The selected language will be heard or seen.
Other:
Other language can be selected (see the
"Language code list" on page 60).
Original: (Audio)
The unit will select the first priority language of
each disc.
Off: (Subtitle)
Subtitles do not appear.
Notes:
• If the selected language is not recorded on the disc, the
first-priority language is selected.
• If you want to change the OSD language, you can perform
it by VCR MENU (see page 15).
56
Customizing the function settings
Setting details
Password ----
Parental Off
Select Files All
Output RGB
DivX(R) VOD Display
/0Ð9/Enter/Clear/Setup/Return
Parental control setting
Some discs are specified not suitable for children. Such
discs can be limited not to play back with the unit.
1) Press C or D to select "Parental", then press B
or A until the level you require appears.
• Level Off: The parental control setting does not
function.
• Level 8: Virtually all DVD software can be played
back.
Level 1: DVD software for adults cannot be
•
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press C or D to select "Password".
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CLEAR.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting can-
not be changed unless you enter the correct pass word.
4) Press OPEN/CLOSE to activate Parental control
setting. (See "Temporary disabling of rating level by
DVD disc" on page 59.)
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says "adult." For
those discs, the age restriction will not work.
To change the parental level
1) Press C or D to select "Password".
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press C or D to select "Parental", then press B
or A to change the parental level.
5) Press C or D to select "Password", then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
"No Disc" appears on the screen.
4. While holding 7 down on the remote control and
then press STOP on the front panel. "PASSWORD
CLEAR" appears on the screen.
5. Enter a new password again.
58
E.B.L. On
TV Screen 4:3
Display On
Picture Mode Auto
JPEG Interval Off
/Setup/Return
E.B.L.
To select the black level of playback pictures, set your
preference and monitor's ability.
On: Enhanced grey scale (0 IRE cut off)
Off: Standard grey scale (7.5 IRE cut off)
TV Screen
You have the following screen sizes to choose from:
4:3 (Letter box):
Select this mode when connecting to a conven-
tional TV. When playing back a wide screen-DVD
disc, it displays the wide picture with black bands
at the top and bottom of screen.
4:3 (Pan scan):
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
16:9 (Wide):
Select this mode when connecting to a wide-
screen TV. A wide screen picture is displayed full
size.
Press OPEN/CLOSE to view in the selected screen size.
Note:
If the DVD disc is not formatted in the pan & scan style, it
displays 4:3 style.
Display
On screen display can be switched on or off when you
press the buttons.
On: On screen displays appear when you press
the buttons (factory setting).
Off: On screen displays do not appear when you
press any buttons.
Select Files
When playing back a CD containing a mixture of MP3,
®
JPEG and DivX files, only MP3 or JPEG files can be
displayed on the file menu.
All:
Displays all files.
Music Only:
Displays only MP3 files.
Pictures Only:
Displays only JPEG files.
Movie Only:
Displays only DivX ® files.
Output
You can select the video output signal of the DVD/VCR
to the TV from "RGB", "Component" or "Progressive".
RGB:
Select when connecting to an RGB or composite TV.
Component:
Select when connecting to a TV equipped with
component video inputs but progressive scan is
not compatible.
Progressive:
Select when connecting to a TV equipped with
component video inputs, progressive scan
compatible.
Warning:
Once "Progressive" is selected when connecting to a TV
progressive scan incompatible, no image will be seen on
the video display.
In this case, you must reset the unit by pressing the STOP
button on the front panel for five seconds. The video output
will be restored to "RGB" setting, and a picture will once
again be seen on a conventional analog display. (You may
need to make the Scart connection if you connect a TV,
progressive scan incompatible, with component lead only.)
Notes:
• Some discs may not be played back with the progres-
sive scanning mode correctly because of the disc
characteristics or recording condition.
• Once Progressive scan on, all other video outputs are
disabled except component video outputs.
DivX ® VOD
In order to play DivX ® VOD (Video On Demand) content
on this unit, you first need to register the unit with your
DivX ® VOD content provider. You do this by generating a
DivX ® VOD registration code, which you submit to your
provider.
1) Select "DivX(R) VOD". Then press ENTER. Your 8-digit
registration code is displayed. Make a note of the code
as you will need it when you register with a DivX ® VOD
provider. Then press ENTER.
2) Press SETUP repeatedly until the TV picture appears.
Note:
If each setup (pages 56~58) has been completed, the unit
can always be worked under the same conditions (espe-
cially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
Customizing the function settings
Picture Mode
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.
Auto: Select this position normally.
The DVD player automatically detects
source content, film or video, of
playback source, and converts that
signal in the progressive output format
in an appropriate method.
Film: The DVD player converts film content
pictures in the progressive output
format appropriately. Suitable for
playback of film content pictures. The
progressive output feature will be most
effective under this selection.
Video: The DVD player filters video signal,
and converts it in the progressive
output format appropriately.
Suitable for playback of video content
pictures.
Note:
Depending on the disc, pictures may be cut off or
doubled. In this case, select "Video".
JPEG Interval
You can continuously play back all JPEG files automati-
cally.
After the setting below, start playing the disc on which
JPEG files have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.

Temporary disabling of rating level by DVD disc

Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set.
It is up to you to decide whether to cancel the rating level or not.
1
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit, see page 41.
2 If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the "Reading Disc" screen will change, depend-
ing on which disc is played. If you select "YES"
with the ENTER key, "Your disc exceeds the
parental control level#." screen will then appear.
Reading Disc
Your disc exceeds
the parental control level#.
Parental Control Level
Cancel Picture
/Enter/Return
3 If you wish to cancel the set rating level temporar-
ily, select "Parental Control Level" with or ,
then press ENTER. If the 4-digit password at step
2 on page 58 has been set, the password entering
screen will appear as shown in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don't know (or have
forgotten) the password, select "Cancel Picture".
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
Dialogue Off: DRC (Std)
QSound Off
/Setup/Return
Dialogue
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
On: DRC (TV):
Loud sound such as explosion or similar is toned
down slightly when played back. This makes it
suitable for when it is connected to a stereo.
Off: DRC (Std):
It plays back at the recording level on the disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
QSound
This DVD video player equipped with a "QSound". It can
produce the effect of being in a cinema or a concert hall.
On: The QSound operates.
Off: The QSound is disengaged.
Note:
The QSound setting can also be changed with AUDIO on
the remote control (see page 49).
57
4
Enter the password with Number buttons (0–9).
Then press ENTER.
To exit from the entry, press RETURN.
Please enter the
-
4 digit password
Enter/0 9/Clear/Return
5 Playback will commence if the entered pass-
word was correct.
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
59