Media Card; Playing A Disc - Toshiba SD-46VSR Service Manual

Media card

Playable Media cards
This unit can play the following cards.
Playable
Card Mark Contents
card
capacity
SD (Secure Digital TM ) 32 MB –
memory card 1 GB
MMC 8 MB –
(MultiMediaCard TM ) 1 GB
MP3/
xD-Picture Card TM 16 MB –
JPEG/
(Type M support) 2 GB
®
DivX
files
16 MB –
Memory Stick TM
128 MB
128 MB –
Memory Stick TM (Pro)
2 GB
CompactFlash ® 8 MB –
memory card (Type 1) 2 GB
• Do not insert any cards other than those listed above
as this may cause a malfunction of the unit or cards.
• Some Media cards may not be played back due to its
capacity and/or manufacturer, etc.
• This product supports xD-Picture Card TM Type M
(Large Capacity).
SD is a trademark of SD Card Association.
MMC and MultiMediaCard are trademarks of Infineon Technologies AG and licensed to MMCA (MultiMediaCard Association).
xD-Picture Card TM is a trademark of Fuji Photo Film Co., Ltd.
Memory Stick is a trademark of Sony Corporation.
CompactFlash is a trademark of the Compact Flash Association.
Toshiba is an authorized licensee of the CompactFlash ® registered trademark.
40

Playing a disc

To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen
while playing a DVD video disc because the high resolution pictures on these discs include a lot of
information. While the amount of noise depends on the TV you use with this unit, you should generally reduce
the sharpness adjustment on your TV when viewing DVD video discs.
To pause playback (still mode)
Press PAUSE/STEP during playback.
To resume normal playback,
press PLAY.
• The sound is muted during still
mode.
To stop playback
Press STOP.
Notes:
• If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the
TV screen according to the type of loaded disc. In this case, check your disc again (see pages 39 and 58).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press OPEN/CLOSE or PLAY
on the unit, "Reading Disc" will appear on the display for 30 seconds and then "Incorrect Disc" will continue to be
displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see
page 50.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays
DVDs according to the disc contents the software producers designed, some playback features may not be
available. Also refer to the instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the unit to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the
unit to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an
on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid
this, be sure to press ON/STANDBY (I / ) on your remote control once the movie is completed.
• There may be a slight delay between you pressing the button and the function activating.
• If the Media card is inserted during the playback, playback will stop and change to the CARD mode
automatically. If you wish to change to the DVD mode, press DVD/CARD.
42
Notes on Media cards
• Ensure that you insert the Media card correctly into
the media card slot.
• Never remove the Media card or turn off the unit while
using the Media card. Doing so may result in loss of
data or damage to the Media card or the unit. SUCH
DAMAGE IS NOT COVERED BY YOUR TOSHIBA
WARRANTY.
• It is recommended that you back up your Media card
data. Toshiba is not liable for any damage caused by
the use of any Media card with this unit. Toshiba will
not compensate for any lost data or recording(s)
caused by the use of such cards.
• Media card is a precision electrical instrument. Do not
bend, drop or apply strong force to it.
• Do not use or store the Media card in an environment
of high static electricity or electrical interference.
• Avoid using or storing in areas of high temperature
and humidity.
• Prevent contact of the metallic area on the Media card
with dust, dirt, or other foreign particles. Do not touch
the metallic area of the Media card with your hands or
otherwise handle it with anything other than a soft,
dry, lint-free, antistatic cloth.
• Use index labels made exclusively for your specific
brand of Media card. Do not use commercially sold
labels, which can cause a malfunction when the card
is inserted or ejected.
• When ejecting the Media card after extended use it
may feel warm to the touch. This is normal. The Me-
dia card is not malfunctioning.
• For instructions on using your Media card, refer to the
owner's manual for your Media card.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Be sure to press OPEN/CLOSE to close the disc
tray after you remove the disc.
Screen saver function
The screen saver operates when you leave the unit in
DVD stop mode for approx. five minutes.
The screen will repeatedly get dark gradually and back
to normal.
This section shows you the basics on how to play a disc.
Basic playback
Preparations:
• When you want to view a disc, turn on the TV and
select the corresponding AV input connected to the
DVD/VCR. This may include video or component video
inputs which are exclusive to DVD playback.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the
input connected to the DVD/VCR.
1 Press ON/STANDBY (I / ), then press DVD to
select the DVD mode.
The DVD/VCR turns on and the DVD
indicator lights up.
"Reading Disc" display will change
to "No Disc".
(If DVD disc has already loaded,
playback will start automatically.)
No Disc
2 Press OPEN/CLOSE.
The disc tray opens.
3
Place the disc on the disc tray.
With the playback
side down
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD to malfunction.
• Do not place a disc which is unplayable in this
DVD.
You can play discs at various speeds.
Playing in fast reverse or fast forward directions
Press REV or FWD during playback.
REV: Fast reverse playback
FWD: Fast forward playback
Each time you press the REV or
FWD button, the playback speed
changes.
Playing frame by frame
Press PAUSE/STEP during still playback.
Each time you press the PAUSE/
STEP button, the picture advances
one frame.
Playing in slow motion
Press SLOW during playback.
Each time you press the button, the
slow motion speed changes.
Locating a chapter or track
Press SKIP or repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
One touch repeat
Press ONE TOUCH REPEAT during playback.
The playback skips back about 10 seconds and starts
playing again.
If you press ONE TOUCH REPEAT again after the
skipping back, it skips back a further 10 seconds.
Notes:
• A "Prohibition" symbol may appear at the upper left of the screen. This symbol means either the feature you tried is not
available on the disc, or the DVD can not access the feature at this time. This does not indicate a problem with the DVD.
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
Playing a disc
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
4 Press OPEN/CLOSE or PLAY on the unit.
The disc tray closes automatically.
On the TV-screen, " " changes to
Reading Disc
" " and then playback
OR
commences.
Reading Disc
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press C/D or B/A to select title, then press
ENTER. Title is selected and play commences.
Press STOP to end playback.
5
Resuming facility
• The unit records the stopped point,
depending on the disc. " "
appears on the screen. Press
PLAY to resume playback (from
the scene point).
• If you press STOP again or unload
the disc (" " appears on the
screen.), the unit will clear the
stopped point.
To start playback in the stop mode
Press PLAY.
41
Playing a disc
To resume normal playback
Press PLAY.
Notes:
• The DVD/VCR mutes sound and subtitles during reverse
and forward scan of DVD/VCD video discs. However, this
unit plays sound during fast forward or fast reverse play of
audio CDs.
• The playback speed may differ depending on the disc.
To resume normal playback
Press PLAY.
Note:
The sound is muted during frame by frame playback.
To resume normal playback
Press PLAY.
Note:
The sound is muted during slow motion playback.
Playback starts from the beginning of the
current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of the
preceding chapter or track.
Notes:
• Some discs may not work with the one touch repeat
function.
• Some functions may be unavailable due to the disc
configuration.
• Depending on the playback status, one touch repeat may
not skip back as intended.
43