Table of Contents
Advertisement
Mapping TV stations
TO MOVE THE TV STATION TO ANOTHER CHANNEL
POSITION
EXAMPLE : Move the TV station from position 4 to position 6.
1
Press VCR MENU. Press
then press ENTER.
2
Press
the ENTER.
3
Press
lect the TV station to be
moved.
4
Press number button "2" to
select the MOVE CHANNEL
option.
5
Press
the position number to which
the selected TV station is to be
moved, then press ENTER.
Press VCR MENU to return to
the normal screen.
NOTE:
"WAIT" will blink on the screen whilst the
station is being moved.
20
Manual TV station presetting
Manual station presetting
The Auto CH Memory function (See
page 18) memorizes all broadcasts to
You activate the auto search function until your preferred station is
the suitable CH positions.
tuned in. Then you memorize this station into the chosen channel
However some broadcast may not be
memory. Repeat this procedure for each station.
memorized due to weak signal. In this
Preparation:
case, use manual tuning function.
• Turn ON the TV and set to the AV input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)
Example: Preset one station on program position 5.
1
Press VCR MENU.
Press
NEL SETUP. Then press EN-
TER.
2
Press
TUNING. Then press ENTER.
3
B/G will blink. Press
select [ B/G ], [ D/K ] or [ I ]. Then
press ENTER.
4
DEC OFF will blink. Press EN-
TER. DEC OFF does not blink
anymore. SEARCH will appear.
Note:
If you wish to store the PRE-
MIERE manually, the decoder
must be connected as on the
Note:
lower of p.12.
Occasionally, the auto search might catch
During DEC OFF is blinking, press
a weak signal and stop. If the TV station
DEC ON will blink now.
signal is weak, you shouldn't store this
Press ENTER.
station.
In this case, restart the auto search us-
ing
or
.
22
/
to select the CHANNEL SETUP,
/
to select the CHANNEL MAPPING, then press
/
or
/
to se-
CHANNEL MAPPING
1
5
9
2
6
10
3
7
11
4
8
12
SELECT
:
/
SKIP
: CANCEL
CHANGE NAME : 1
MOVE
: 2
EXIT
: MENU
MOVE CHANNEL
4
1
5
9
2
6
10
3
7
11
4
8
12
POSITION
:
/
MOVE
: ENTER
EXIT
: MENU
/
or
/
to select
MOVE CHANNEL
4
1
5
9
2
6
10
3
7
11
4
8
12
POSITION
:
/
MOVE
: ENTER
EXIT
: MENU
TIMER REC SET
or
to select CHAN-
AUTO REPEAT
[OFF]
VCR SETUP
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT
:
MENU
or
to select CH
CHANNEL SETUP
CH TUNING
AUTO TUNING
CHANNEL MAPPING
SELECT :
ENTER : ENTER
EXIT
:
MENU
or
to
CH 1
D/K
DEC OFF
SELECT :
OK
:
ENTER
EXIT :
MENU
CH 1
D/K
DEC OFF
SELECT :
EXIT :
OK
:
ENTER
MENU
.
Skipping unwanted TV stations
Preparation:
(Skip those TV stations that are not
• Turn ON the TV and set to the AV input mode.
wanted to be selected by pressing the
• Press VCR to select the VCR mode. (The VCR indicator will light.)
CH+/–)
1
Press VCR MENU. Press
to select CHANNEL SETUP.
Then press ENTER.
2
Press
NEL MAPPING. Then press
ENTER.
3
Press
edly until the TV station to be
skipped blinks.
4
Then press CANCEL.
The number to be cancelled (e.g.
12) will be bracketed.
Canceling the skip function:
Press
edly until the skipped TV station
blinks, then press CANCEL.The
brackets will disappear.
5
Press VCR MENU repeatedly until the TV picture appears on
the screen.
Manual TV station presetting
The Fine Tuning adjustment
5
Press
Under a normal receiving condition, the
The search starts. It stops at each broadcast automatically
station-search will stops automatically at
(" 1 " change to "
the best receiving position. That picture
will appear without disturbance.
or
station you want appears. Only
This receiving position will be memorized
automatically. The Fine Tuning cannot be
in case of receiving of the weak
memorized additionally.
broadcast (drifting picture),
search dose not stop. If you
In rare case of bad receiving condition,
want to stop, press
the station-search might not stop at the
/
.
best receiving position. That picture will
appear with disturbance, e.g. waving
6
lines.
Please wait until OK :ENTER
Only in this rare case, use the Fine
appears. It may take a few sec-
Tuning to tune the concerned station
onds.
manually and exactly.
Then press ENTER.
In step 6, press
or
until the station
In the next step, the program
is adjusted to best position. Then press
position on which this station
ENTER.
should be stored will be set.
7
Press
"5" displayed.
Or enter 5 with number buttons.
Then press ENTER.
8
Repeat the steps 3 and 7 to preset other TV stations.
9
Press VCR MENU repeatedly until the TV picture appears on
the screen.
Mapping TV stations
or
TIMER REC SET
AUTO REPEAT
[OFF]
VCR SETUP
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT
:
MENU
or
to select CHAN-
CHANNEL SETUP
CH TUNING
AUTO TUNING
CHANNEL MAPPING
SELECT :
ENTER :
ENTER
EXIT
:
MENU
/
or
/
repeat-
CHANNEL MAPPING
1
5
9
2
6
10
3
7
11
4
8
12
SELECT
:
SKIP
:
CANCEL
CHANGE NAME
:
1
MOVE
:
2
EXIT
:
MENU
CHANNEL MAPPING
1
5
9
2
6
10
3
7
11
8
4
[12]
SELECT
:
/
or
/
repeat-
SKIP
:
CANCEL
CHANGE NAME
:
1
MOVE
:
2
EXIT
:
MENU
21
(higher frequencies) or
(lower frequencies) once.
"). Press
CH 1
repeatedly until the
D/K
DEC OFF
/
or
SEARCH :
/ F. TUNE :
EXIT
:
MENU
CH 1
D/K
DEC OFF
/ F. TUNE :
SEARCH :
OK
:
ENTER
EXIT :
MENU
or
repeatedly until
CH 5
D/K
DEC OFF
CH
:
/ 0 9
OK
:
ENTER
EXIT :
MENU
23
Advertisement
Chapters
Table of Contents
