Marquis Crown Summit Owner's Manual page 51

SPA CARE
WEEKLY
Spa Shock
Sanitizer combines with bacteria and neutralizes sanitizer/bacteria on contact. However, the used
sanitizer/bacteria particle is still present in the spa water. Used sanitizer in the water emits an
odor and causes cloudy water. To oxidize, or rid the spa of this used sanitizer, you must shock the
spa once a week. For best results, and to protect your spa cover leave the spa cover open for a
minimum of 20 minutes after shocking the water.
NOTE: Additional shocking may be necessary if the spa is under heavy use. For @ease w/Smart
Chlor (for use in the US only) you will only need to shock as needed or monthly.
AS NEEDED PRODUCTS
pH Increaser, Alkalinity Increaser
pH & Alkalinity Decreaser
These three products work to raise or lower the pH and alkalinity in the spa. They are only
needed if the test strip indicates the levels are not in the ideal ranges.
Water Clarifier
Microscopic particles can pass through the spa filter and create cloudy water. The use of Marquis
Water Clarifier combines these microscopic particles into larger particles that can be trapped in
the filter to clear cloudy water.
Spa Defoamer
If foam appears in your spa, the action of the jets will keep it from dissipating. The use of Marquis
Spa Defoamer instantly rids your spa water of foam.
Metal and Stain Remover
Metal and Stain Remover will remove metals such as iron and copper from spa water.
51