LG KP260 Service Manual page 24

The backlight of LCD module is controlled by AD6726 via AAT2845.
The control signals related to Backlight LED are given as follows.
Signals
MLED
LCD_DIM_CTRL
MLED[1:4]
Table 3.5.B2 DESCRIPTION OF LCD BACKLIGHT LED CONTROL
C. RF interface
The AD6726 control RF parts through PA_BAND, ANT_SW1, ANT_SW2, ANT_SW3 , CLKON ,
PA_EN, S_EN, S_DATA, S_CLK
Signals
PA_BAND (GPIO 0)
ANT_SW1 (GPO 9)
ANT_SW2 (GPO 10)
PA_EN (GPO 16)
S_EN (GPO 19)
S_DATA (GPO 20)
S_CLK (GPO 21)
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Current source for backlight LED
Control LCD backlight level in 16 steps
This pins are returned-paths for backlight LED current source (MLED)
PAM Band Select
Antenna switch Band Select
Antenna switch Band Select
PAM Enable/Disable
PLL Enable/Disable
Serial Data to PLL
Clock to PLL
Table 3.5.C RF CONTROL SIGNALS DESCRIPTION
- 25 -
3. TECHNICAL BRIEF
Description
Description
LGE Internal Use Only