F-14
AUXILIARY TRANSFORMER (T1) VOLTAGE TEST PROCEDURE (continued)
A U X I L I A R Y
T R A N S F O R M E R ( T 1 )
A R E A
R E C O N N E C T
PROCEDURE
1. Disconnect main AC input power to the
machine.
2. Remove the lower left and right case sides.
3. Locate the Auxiliary Transformer (T1) on the
left lower right rear of machine. See Figure
F.1.
4. Locate the Auxiliary Transformer above prima-
ry leads (H1, H3, etc.) at the reconnect area.
(T1). See wiring diagram.
NOTE: Unused leads should be taped. Check
for loose or faulty connections.
TROUBLESHOOTING AND REPAIR
FIGURE F.1 – Auxiliary Transformer Location
IDEALARC® DC-1500
RECONNECT
AREA
AUXILIARY
TRANSFORMER (T1)
F-14