Install Memory Module - JETWAY HA 18 User Manual

2-4

Install Memory Module

This motherboard provides four 240-pin DDR III DUAL INLINE MEMORY MODULES
(DIMM) socket for DDR III memory expansion available to maximum memory volume
of 16GB DDRIII SDRAM.
Valid Memory Configurations
Bank
DDRIII1
DDRIII 2
DDRIII 3
DDRIII 4
Total
Recommend DIMM Module Combination
One DDRIII Memory Module ----Plug in DDRIII1
1.
Two DDRIII Memory Modules---Plug in DDRIII1 & DDRIII2
2.
Four DDRIII Memory Modules---Plug in DDRIII1 & DDRIII 2 & DDRIII3 &
3.
DDRIII4
Dual channel Limited!
1. Dual channel function only supports when 2 DIMM Modules plug in either both
DDRIII1 & DDRIII2, or four DIMM Modules plug in DDRIII1~DDRIII4
2. Memory modules plugged in the same color DIMM must be of the same type,
same size, and same frequency for dual channel function
Install DDRIII modules to your motherboard is not difficult, you can refer to figure
below to see how to install DDRIII 1066/ 1333/1600/1866* SDRAM module.
Installation Tips：
Open the two plastic clips of memory slots then push down the module
vertically into the slot. See to it that the hole of the module fit into the notch of
the slot.
The two plastic clips will automatically close if the memory module is fitted in a
proper way.
We suggest that priority given to DDRIII1 and DDRIII2 in multi-DIMM
installation. System won't start when you only install memory DIMM in
DDRIII2/DDRIII3/DDRIII4.
240-Pin DIMM
DDR III 1066/1333/1600/1866*
DDR III 1066/1333/1600/1866*
DDR III 1066/1333/1600/1866*
DDR III 1066/1333/1600/1866*
System Memory (Max.4 GB)
DDRIII1 & DDRIII2: Dual Channel 1
DDRIII3 & DDRIII4: Dual Channel 2
Graph 2-4
PCS
X1
X1
X1
X1
4
：
9
Maximum Capacity
4GB
4GB
4GB
4GB
16 GB