Thermal Solution Assembly - JETWAY HA 18 User Manual

2-3-3 Thermal Solution Assembly

1. Apply a thin and even layer of
thermal grease upon the CPU HIS
surface.
3. Make sure that the fastener of
other side of the FAN clipped into
another mounting lug on the opposite
side of stand. Then pull the level as
to the right as the photo show above
to fasten the fan.
Notice ：
Please apply thermal interface material to the CPU HIS surface.
The heat sink and installation steps are for reference use only; Installation
steps might differ depending on different heat sink models.
2. Put cooling fan upon CPU HIS
surface and see to it that the fastener
of one side of the FAN clipped into the
mounting lug of stand for CPU FAN
installation.
4. Insert power connector of cooling
fan to CPU fan header of the
motherboard.
8