Table of Contents
Advertisement
www.ti.com
5.2.2.5 Capture Configuration Settings
A slide-out menu is viewable on the right side of the Chart window. By clicking the slide-out for Show Capture
Settings various configurations display and are selectable. The drop-down menu Capture Settings are:
•
Select data rate for the data output conversion rate
•
Select MUX channels by choosing the desired input channels to be converted
•
Select FSR for choosing the voltage input measurement range
5.2.3 Configuration
The Register Map window contains information about the configuration and the last conversion data from the
TLA2024 device. The Conversion register contains the value of the last 12-bit conversion result read from the
TLA2024. The conversion data are 12-bit left-justified in the 16-bit register.
As the TLA2024 is a programmable device, the Config register is the only programmable register and is 16 bits
in length.
A number of control buttons and drop-down menus exist to configure the Register Map read and write operations
when data are written and read from the TLA2024.
Throughout the Register Map window question mark icons appear. Clicking on these icons open details
pertaining to the items in the locations where they appear.
SBAU368 – FEBRUARY 2021
Submit Document Feedback
Figure 5-20. Capture Settings
Copyright © 2021 Texas Instruments Incorporated
TLA2024EVM-PDK GUI
TLA2024EVM-PDK User's Guide
27
Advertisement
Table of Contents
