Operation; Charging The Battery; Turning The Flir One Camera On And Off; Connecting The Flir One Camera To Your Phone - Teledyne FLIR ONE Series User Manual

6

Operation

6.1 Charging the battery

WARNING
Make sure that you install the socket-outlet near the equipment and that it is easy to get access to.
Follow this procedure:
• Connect a power supply to a wall outlet.
• Connect the power supply to the USB-C connector power on the FLIR ONE camera.
• Let the battery charge for approximately 40 minutes.
• The charge indicator will flash green during charging, and then change into a steady
green light when fully charged.

6.2 Turning the FLIR ONE camera on and off

• Push the On/off button on the bottom of the FLIR ONE camera to turn it on. It takes
about 20 seconds for the camera to start. The indicator will flash green when the FLIR
ONE camera is ready.
• The camera automatically turns off after 2 minutes of inactivity.
• Push and hold the On/off button for more than 2 seconds to turn off the FLIR ONE
camera.
6.3 Connecting the FLIR ONE camera to your
phone
Download and install the FLIR ONE app on your phone, and then start it.
Turn on the FLIR ONE camera and connect it to your phone. If needed, adjust the blue di-
al of the OneFit connector and extend the connector to the appropriate length to fit your
phone's protective case.
If the FLIR ONE camera is turned off when you connect it to your phone, the app will
prompt you to attach your FLIR ONE camera before you can view the camera features.
#T810375; r. AB/76566/76566; en-US
8