Motion Sequencing 2.0
Shape
The Shape Lane creates a contour over the duration of the step. It can affect the Pitch Lane and/or any of the Seq Lanes
(when the respective Lane's Use Shape is On).
Shape Lane
Press
SHIFT-12 (SHAPE)
to go to this page.
Preset, Loop (Start), to (Loop End), Mode, Repeats, NoteAdv
See "Standard Lane Controls" on page 34.
Shape Lane Step
Step
See "Step" on page 37.
Shape
[List of shapes]
There are a large number of shapes to choose from, including ones with two, three, or four pulses.
Offset
[-1.00...+1.00]
This offsets the entire shape up or down. Offset works in conjunction with Level, below, similar to Offset and Amount
in Mod Processor "Gate" on page 76. For instance, if you want Shape to control volume, but don't want the volume to
drop all the way to silence, set both Offset and Level to +0.50.
Level
[-2.00...+2.00]
This varies the amplitude of the Shape. Negative values invert the shape.
41