Pnp/Pci Configurations - Biostar M6VCT User Manual

Biostar m6vct motherboard: user guide
Hide thumbs Also See for M6VCT:
Table of Contents

Advertisement

Chapter 2

2.7 PnP/PCI Configurations

This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at speeds
nearing the speed the CPU itself uses when communicating with its own special
components. This section covers some very technical items and it is strongly
recommended that only experienced users should make any changes to the default
settings.
Figure 7. PnP/PCI Configurations
CMOS Setup Utility-Copyright (C ) 1984-2000 Award Software
PNP OS Installed
Reset Configuration Data
Resources Controlled By
IRQ Resources
X
DMA Resources
X
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
: Move Enter :Select +/-/PU/PD :Value F10 :Save ESC :Exit F1 :General Help
F5 :Previous Values
PnP/PCI Configurations
NO
Disabled
Auto (ESCD)
Press Enter
Press Enter
Disabled
Enabled
Enabled
F6 :Fail-Safe Defaults
2-27
BIOS Setup
Item Help
Menu Level
Select Yes if you are
using a Plug and Play
capable operating
system Select NO if
you need the BIOS to
configure non-boot
devices
F7 : Optimized Defaults

Advertisement

Table of Contents
loading

Table of Contents