Table of Contents
Advertisement
Chapter 2
First /Second/Third/Other Boot Device
These BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
The Choices: Floppy, LS/ZIP, HDD-0, SCSI, HDD-1, HDD-2, HDD-3
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive name
assignments.
The Choices: Enabled, Disabled (default).
Boot Up NumLock Status
Select power on state for NumLock.
On (default)
Off
Gate A20 Option
Select if chipset or keyboard controller should control GateA20.
Normal
Fast (default)
Security Option
Select whether the password is required every time the system boots or only when
you enter setup.
System
Setup (default)
Note: To disable security, select PASSWORD SETTING at Main Menu and
then you will be asked to enter password. Do not type anything and just
,
LAN, Disabled, CDROM, Enabled.
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard controller controls
GateA20.
Lets chipset control GateA20.
The system will not boot and access to
Setup will be denied if the correct
password is not entered at the prompt.
The system will boot, but access to Setup
will be denied if the correct password is
not entered at the prompt.
2-11
BIOS Setup
Advertisement
Table of Contents
