Table of Contents
Advertisement
Chapter 2
PM Control by APM
The Choices:
No
Yes (default)
Video Off Option
This determines the manner in which the monitor is blanked.
Suspend — — — — 〉 〉 〉 〉 Off (default) During Suspend mode, the monitor will be
All Modes —〉Off
Always On
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank (default) This selection will cause the system to
DPMS Support
Blank Screen
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The Choices: 3 (default), 4, 5, 7, 9, 10, 11, NA.
System BIOS will ignore APM when
power Management is on.
System Bios will wait for APM's
prompt
before it enters any PM mode.
turned off.
During All modes, the monitor will be
turned off.
During Always mode, the monitor will be
turned on.
turn off the vertical and horizontal
synchronization ports and write blanks to
the video buffer.
Initial
display
power
signaling.
This option only writes blanks to the video
buffer.
2-23
BIOS Setup
management
Advertisement
Table of Contents
