Front Suspension Oil; Bolts, Nuts And Fasteners; Gas Tube - GAS GAS ENDURO 4T EC 2014 Owner's Manual

Owner´s manual
Maintenance
1
1

31.-FRONT SUSPENSION OIL

Adjust the oil level
To adjust the oil level you must first remove the spring, follow the steps descri-
bed in "Changing the fork spring" to do so.
Once removed the spring compress the fork completely and gently push the
hydraulic rod (1) down until it stops.
Adjust the desired oil level and reassemble the whole.
The oil level is always adjusted from the top of the fork legs as shown in the
diagram (2).
Recommended oil MARZOCCHI 48: MARZOCCHI EBH 16 7,5WT
Oil volume: 320 ml. 250/300cc.
Recommended oil ÖHLINS RXF: ÖHLINS 01312
Oil volume: 300 ml.
2

32.-BOLTS, NUTS AND FASTENERS

Every day before riding the bike, you should check that all bolts and nuts are
tightened. Also check that the other fasteners are in place and in good condition.

33.-GAS TUBE

Given the observation of a necking (narrowing) of the tube (1) anywhere (usua-
lly in the gasoline inlet in the carburetor or the outlet of the fuel tap), symptoms
of cracking or crazing surface, it is imperative to change the gas tube.
DANGER
Riding with a damaged gas tube, or simply starting the engine, can cause a fire
and subsequent crash (and related injuries)
Always use the original gas tube, your GAS GAS official service will provide it
to you.
-50-
350 ml. 450cc.