Front Suspension Oil; Bolts, Nuts And Fasteners; Gas Tube - GAS GAS EC250E 2012 Owner's Manual

Owner's manual
Maintenance
1
1

31.-FRONT SUSPENSION OIL

Adjust the oil level
To adjust the oil level you must fi rst remove the spring, follow the steps descri-
bed in "Changing the fork spring" to do so.
Once removed the spring compress the fork completely and gently push the
hydraulic rod (1) down unti l it stops.
Adjust the desired oil level and reassemble the whole.
The oil level is always adjusted from the top of the fork legs as shown in the
diagram (2).
Standard oil level: 130 mm
Recommended oil: FUCHS TITAN 1091 SAF
Capacity: 612 cc
2

32.-BOLTS, NUTS AND FASTENERS

Every day before riding the bike, you should check that all bolts and nuts are
ti ghtened. Also check that the other fasteners are in place and in good conditi on.

33.-GAS TUBE

Given the observati on of a necking (narrowing) of the tube (1) anywhere (usua-
lly in the gasoline inlet in the carburetor or the outlet of the fuel tap), symptoms
of cracking or crazing surface, it is imperati ve to change the gas tube.
DANGER
Riding with a damaged gas tube, or simply starti ng the engine, can cause a fi re
and subsequent crash (and related injuries)
Always use the original gas tube, your GAS GAS offi cial service will provide it
to you.
-53-