Front Suspension Oil; Bolts, Nuts And Fasteners; Gas Tube - GAS GAS EC 2T 20012501300cc RACING Owner's Manual

Owner's manual
Maintenance
1
1

31.-FRONT SUSPENSION OIL

Adjust the oil level
To adjust the oil level you must first remove the spring, follow the steps descri-
bed in "Changing the fork spring" to do so.
Get a liquid graduated cylinder in which you must fill the indicated volume of
the recommended oil (each bottle).
Fill the oil slowly from the graduated cylinder into the tube of the fork.
Thereupon, to ensure proper hydraulic bleed push gently and alternatively the
rod (1) during all the travel (up and down) until its stops, several times.
Scrupulously respect filling volume, since it determines the level of oil inside the
fork (2) and the correct operation thereof.
Reassemble the whole fork.
Recommended oil MARZOCCHI 48: MARZOCCHI EBH16 7,5WT
Oil volume: 320 ml.
Recommended oil ÖHLINS RXF: ÖHLINS 01312
2
Oil volume: 300 ml.

32.-BOLTS, NUTS AND FASTENERS

Every day before riding the bike, you should check that all bolts and nuts are
tightened. Also check that the other fasteners are in place and in good condition.

33.-GAS TUBE

Given the observation of a necking (narrowing) of the tube (1) anywhere (usua-
lly in the gasoline inlet in the carburetor or the outlet of the fuel tap), symptoms
of cracking or crazing surface, it is imperative to change the gas tube.
DANGER
Riding with a damaged gas tube, or simply starting the engine, can cause a fire
and subsequent crash (and related injuries)
ALWAY USE THE ORIGINAL GAS TUBE, YOUR GAS GAS OFFICIAL SERVICE WILL
PROVIDE IT TO YOU.
-78-