Parker A Series Installation & Service Instructions Manual page 6

isysNet 24 VDC Output Modules, Series A
Add 24 VDC Output Modules to RSLogix
5000 I/O Configuration
To add your output modules to RSLogix 5000 I/O configuration,
follow these steps:
• In RSLogix 5000:
- For ControlNet, highlight the PSSCCNA or 1738-ACNR
(Shown), right click and select New Module.
- For EtherNet/IP, highlight the PSSCENA or 1738-AENT
(Shown), right click and select New Module.
If your RSLogic 5000 is Version 15.X or greater:
• Choose the PSST8M12A module from the list of Parker
modules.
• Enter a name and click OK.
• Notice that the PSST8M12A is now under the I/O configuration.
6
E107P