Table of Contents
Advertisement
Specifications
For specifications on the available copper Ethernet ports, refer to
Port Specifications (Page
4.2
Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either LC (Lucent Connector), SC
(Standard or Subscriber Connector) or ST (Straight Tip) connectors. Make sure the
Transmit (Tx) and Receive (Rx) connections of each port are properly connected and
matched to establish a proper link.
1
1
2
Figure 4.4
1
1
2
Figure 4.6
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page
4.3
SFP Transceivers
The RUGGEDCOM RSG2288 supports up to two Small Form-Factor Pluggable (SFP)
transceiver sockets, which are compatible with a wide array of SFP transceivers
available from Siemens.
RUGGEDCOM RSG2288
Installation Manual, 04/2021, C79000-G8976-1045-17
Pin
10/100Base-TX
7
Reserved (Do Not Connect)
8
Reserved (Do Not Connect)
38)".
Tx Connector
Rx Connector
SC Port
Tx Connector
Rx Connector
ST Port
Name
1000Base-TX
BI_DD+
BI_DD-
2
1
Tx Connector
1
Rx Connector
2
Figure 4.5
2
38)".
Communication Ports
4.2 Fiber Optic Ethernet Ports
Description
Receive Data- or Bi-
Directional Pair D+
Receive Data- or Bi-
Directional Pair D-
"Copper Ethernet
2
LC Port
"Fiber Optic
31
Advertisement
Table of Contents
