Hamilton Beach HVC254 Operation Manual page 8

Change the Soft Air and Cooling Times
Cooling Time (F.1)
Your vacuum-sealing machine is equipped with a COOLING TIME feature that allows for sealing bar to
cool off while setting a secure seal on the vacuum-seal pouch. It can be adjusted from factory setting of
3.0 seconds up to 9.9 seconds, allowing enough time to set seal in thicker pouches.
Soft Air (F.2)
Your vacuum-sealing machine is equipped with a SOFT AIR feature that allows for entry of air back into
chamber at a slow rate to help prevent damage to pouches. Time can be adjusted from factory setting of
2.0 seconds up to 9.9 seconds.
Soft Air Bleeding Time
Changing Cooling Time
1. In standby mode, display will show "oo." Press and hold FUNCTION SELECT
3 seconds until "F.1" appears on the display.
2. Press the FUNCTION SELECT
3. Press the +/STOP VAC
4. Press the FUNCTION SELECT
5. Press and hold FUNCTION SELECT
6. Unit will return to standby mode and display will show "oo."
Changing Soft Air
1. In standby mode, display will show "oo." Press and hold FUNCTION SELECT
until "F.1" appears on the display.
2. Press the +/STOP VAC
3. Press the FUNCTION SELECT
4. Press the +/STOP VAC
5. Press the FUNCTION SELECT
6. Press and hold FUNCTION SELECT
7. Unit will return to standby mode and display will show "oo."
NOTE: Soft air and cooling times are applied to all programs. Regardless of which program is selected,
the soft air and cooling times are the same.
8
FEATURE CODE
Cooling Time F.1
F.2
button to view the set time.
and –/STOP buttons to adjust desired time.
button to confirm time. Display will show "F.1" again.
button for 3 seconds to save cooling time.
button to select "F.2."
button to view the set time.
and –/STOP buttons to adjust desired time.
button to confirm time. Display will show "F.2" again.
button for 3 seconds to save cooling time.
UNIT RANGE
Seconds 3.0–9.9
Seconds 2.0–9.9
button for
button for 3 seconds