Table of Contents
Advertisement
Panel Disconnect
Some PolyTherm chiller/heater systems are optionally
equipped with a panel-mounted disconnect switch
installed on the outside of the power distribution panel (or
on each module's electrical and control panel if the chiller/
heater has power supplied directly to each individual
Figure 31. PolyTherm master module high voltage
Figure 32. PolyTherm slave module high voltage
Touchscreen Interface Panel
The touchscreen interface panel is the primary means for
controlling and monitoring the system for operator and
maintainer. An operator touch screen interface panel is
installed on the master module to allow operator
adjustment of user set points and alarm monitoring. See
the below figure.
ARTC-SVX005A-EN
module). The disconnect switch must be turned to the off
position before the panel can be opened for service.
Module Electrical Panel
From the power distribution panel, power is fed to the
individual modules in the chiller/heater and connects to
each module's electrical panel. See the following figures.
Controls Interface
51
Advertisement
Table of Contents
