Table of Contents
Advertisement
Operating Procedures
Touchscreen Interface Tutorial
This section consists of a tutorial that first-time personnel
can use to navigate through the various functions and
features that are available in the interface.
Each of the main screens in the interface contains active
hot spots to activate virtual buttons and switches by
simply touching the screen.
Figure 17. Interface navigation scheme
Home Screen
On startup, the home screen, entitled 'System Control,' is
displayed. From the home screen, all major function at
each access level can be accessed. The system control
screen is the home screen that is a convenient starting
point for most interactions described below.
Modules Layout Screen
On the home screen, pressing the module layout button
displays the modules layout screen
screen is a graphical representation of the modules that
are available in the chiller/heater.
Overview Screens
Overview of main chiller/heater module refrigeration
parameters and status of its components: refrigeration
30
(Figure 21, p.
35). This
Interface Menu Structure
Key interface screens are organized according to system,
master module, and slave modules functions. See the
below figure.
c
circuit, heat exchangers, compressors, and the module
itself. There are two overview screens for each module.
These screens are different for the master module and the
slave modules.
Input/Output Screen
The state and description of the module microprocessor
controller's digital and analog inputs and outputs. The I/O
menu is comprised of four screens for Master Module and
three screens for Slave Module.
Trend Screens
Trending curves for cooling and heating demand are
displayed here. There are two trend screens: cooling
trends and heating trends. The trend screens apply only to
the master module.
Setup Screens
Setup screens are available only for the 'admin' level.
Setup screens contain all the chiller/heater settings
applied to system and for individual module settings.
ARTC-SVX005A-EN
Advertisement
Table of Contents
