Delta AC MAX Installation And Operation Manual page 13

2. Align the product with the screw holes on the mounting bracket.
3. Secure the product on the mounting bracket with the supplied Torx T30 screws.
Torque: 1.5 N·m (13 lb·in)
Remove Front and Middle Covers
1. Remove the screw located at the bottom of the front cover by using a Torx T20 screwdriver.
2. Pull the front cover upward to separate from the charger.
Installation and Operation Manual
Figure 7. Installing a Charger
2
1
Figure 8. Removing Front Cover
8
Installation and Operating Instructions