Table of Contents
Advertisement
Using a digital satellite
receiver or other components
with a high audio output level
Connect the satellite receiver to the VIDEO/
SAT jacks on the rear panel. You can also
connect the components with a high audio
output level (including 2V r.m.s components,
such as MD, etc.) to the VIDEO/SAT jacks, and
perform the following to prevent distortion
occurring.
1
Press FUNCTION repeatedly until
"VIDEO" appears in the front panel
display.
2
Press AMP MENU.
3
Press X/x repeatedly until
"ATTENUATE" appears in the front
panel display, then press ENTER or c.
4
Press X/x to select "ATT ON" in the
front panel display.
The output level is changed.
When you select "ATT OFF" and press x,
this operation will be canceled.
5
Press ENTER or AMP MENU.
The AMP menu turns off.
The function name in the front panel
display changes to "SAT."
Tip
• To return to the VIDEO function, select "ATT OFF"
at Step 4.
62
GB
Enjoying the Radio
TUNER
MENU
CLEAR
C/X/x/c
ENTER
TUNING –/+
Presetting radio stations
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
1
Press FUNCTION repeatedly until the
band you want appears in the front
panel display.
2
Press and hold TUNING + or – until the
auto scanning starts.
Scanning stops when the system tunes in a
station. "TUNED" and "ST" (for stereo
program) appear in the front panel display.
3
Press TUNER MENU.
4
Press C/X/x/c repeatedly until
"MEMORY" appears in the front panel
display.
5
Press ENTER.
A preset number appears in the front panel
display.
FUNCTION
VOLUME +/–
PRESET
–/+
Hide quick links:
Advertisement
Table of Contents
