Step 3: Tv Hookup; Video Cord - Sony HCD-DZ100 Operating Instructions Manual

Step 3: TV Hookup

First, perform the video connection, and then audio connection.
With your TV's audio output connected to this system, you can listen to TV sound through the system
speakers.
Connecting the video cords
Sends a played back DVD image to a TV.
Check the jacks of your TV, and choose the A, B or C connection. Picture quality improves in order
from A (standard) to C (component).
A
VIDEO
IN
TV
A
To connect to a TV with the VIDEO IN jacks
Connect the video cord.
B
To connect to a TV with the S VIDEO IN jack
Connect an S video cord (not supplied). When using the S video jack instead of the video jacks, your
TV monitor must also be connected via an S video jack. S video signals are on a separate bus from the
video signals and will not be output through the video jacks.
FRONT R FRONT L SURR R SURR L CENTER WOOFER
SPEAKER
B
S VIDEO
IN
TV with S VIDEO IN jack
To COMPONENT
VIDEO OUT
VIDEO/SAT COMPONENT VIDEO OUT DVD ONLY
R AUDIO IN L Y P /C P /C
B B R R
To VIDEO
Y
P /C
B B
P /C
R R
TV with COMPONENT
VIDEO IN jacks
Yellow
S VIDEO (DVD ONLY)
AM
VIDEO
MONITOR OUT
COAXIAL
FM
75
To
S VIDEO
C
continued
19
GB