Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sony 4-147-229-13(1)
Summary of Contents for Sony 4-147-229-13(1)
- Page 1 The software of this system may be updated in the future. To find out details on any available updates, please visit: http://esupport.sony.com Sony Corporation Printed in Malaysia BD/DVD Home Theatre System Operating Instructions BDV-T10 / T11 / E300 © 2009 Sony Corporation...
- Page 2 The model and serial numbers are located at the rear exterior of the control unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. BDV-T10/BDV-T11/BDV-E300 Serial No.______________...
-
Page 3: Copyrights And Trademarks
• “BD-Live” and “BonusView” are trademarks of Blu- ray Disc Association. • “Blu-ray Disc” is a trademark. • “Blu-ray Disc,” “DVD+RW,” “DVD-RW,” “DVD+R,” “DVD-R,” “DVD VIDEO,” and “CD” logos are trademarks. • “BRAVIA” is a trademark of Sony Corporation. ® is a U.S. ® partner, ) technology. -
Page 4: About These Operating Instructions
• “AVCHD” and the “AVCHD” logo are trademarks of Matsushita Electric Industrial Co., Ltd. and Sony Corporation. • “S-AIR” and its logo are trademarks of Sony Corporation. • , “XMB,” and “xross media bar” are trademarks of Sony Corporation and Sony Computer Entertainment Inc. -
Page 5: About The S-Air Function
About the S-AIR function The system is compatible with the S-AIR function, which allows transmission of sound between S-AIR products wirelessly. The following S-AIR products can be used with the system: • Surround amplifier: You can enjoy surround speaker sound wirelessly. •... -
Page 6: Table Of Contents
Table of Contents About These Operating Instructions ... 4 About the S-AIR function... 5 Unpacking ... 7 Index to Parts and Control ... 11 Getting Started Step 1: Installing the System ...16 Step 2: Connecting the System ...20 Step 3: Performing the Easy Setup ...29 Step 4: Selecting the Source ...32 Step 5: Enjoying Surround... -
Page 7: Unpacking
Unpacking BDV-T10 • Front speakers (2) • Surround speakers (2) • Center speaker (1) • Subwoofer (1) • AM loop antenna (aerial) (1) • FM wire antenna (aerial) (1) • Speaker cords (5, white/red/ blue/gray/green) • Video cord (1) • Remote commander (remote) (1) •... - Page 8 BDV-T11 • Front speakers (2) • Surround speakers (2) • Center speaker (1) • Subwoofer (1) • AM loop antenna (aerial) (1) • FM wire antenna (aerial) (1) • Speaker cords (5, white/red/ blue/gray/green) • Video cord (1) • Remote commander (remote) (1) •...
- Page 9 BDV-E300 • Front speakers (2) • Surround speakers (2) • Center speaker (1) • Subwoofer (1) • AM loop antenna (aerial) (1) • FM wire antenna (aerial) (1) • Speaker cords (6, white/red/ blue/gray/green/purple) • Video cord (1) • Remote commander (remote) (1) •...
-
Page 10: Using The Remote
Using the remote Inserting batteries into the remote Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment. Note • Do not leave the remote in an extremely hot or humid place. •... -
Page 11: Index To Parts And Control
Index to Parts and Control For more information, refer to the pages indicated in parentheses. Remote control ONE-TOUCH THEATER PLAY BRAVIA Sync S-AIR DYNAMIC MODE NIGHT BASS ENTER CLEAR TIME FAVORITES WIDE SYSTEM AUDIO SUBTITLE ANGLE MENU D.TUNING GREEN BLUE YELLOW FUNCTION SOUND MODE... - Page 12 ANGLE (page 38) Switches to other viewing angles when multi-angles are recorded on a BD-ROM/ DVD VIDEO. SYSTEM MENU (pages 33, 42, 49, 53, 56, 71) Enters the system menu. FAVORITES (page 69) Displays the favorite channel list. CC (page 69) Displays closed captioning (when available).
-
Page 13: Front Panel
Front panel A "/1 (on/standby) (page 36) Turns on the unit, or sets to standby mode. B Play operation buttons (page 36) N (play) Starts or re-starts playback. Plays a slideshow when a disc containing JPEG image files is inserted. x (stop) Stops playback and remembers the stop point (resume point). -
Page 14: Front Panel Display
Front panel display About the indications in the front panel display NEO:6 SLEEP A Current surround format B Lights up when a station is received. (Radio only) (page 51) C Lights up when stereo sound is received. (Radio only) (page 51) D Lights up when the external memory is recognized. -
Page 15: Rear Panel
Rear panel SPEAKER CENTER SUBWOOFER A LAN (100) terminal (page 27) B COMPONENT VIDEO OUT jacks (page C VIDEO OUT jack (page 21) D EZW-T100 slot (page 56) E AM terminal (page 25) F COAXIAL 75Ω FM jack (page 25) G A.CAL MIC jack (pages 29, 66) H AUDIO (AUDIO IN L/R) jacks (page 23) I TV (AUDIO IN L/R) jacks (page 22) -
Page 16: Getting Started
Getting Started Step 1: Installing the System Positioning the speakers For the best possible surround sound, place all speakers at the same distance from the listening position (A). The distance can be between 0 to 23 feet (0.0 to 7.0 meters). If you cannot place the center speaker and surround speakers at the same distance as (A), place them within 23 feet (7.0 meters) of the listening position. - Page 17 To add the optional surround back speakers You can enjoy 7.1 surround sound by purchasing the Wireless Surround Speaker Kit (WAHT-SBP1, optional). The optional product lineup differs depending on the area. For the position of the surround back speakers, refer the illustration below (C). Front left speaker (L) Surround left speaker (L)
-
Page 18: Installing The Speakers On A Wall
Install the speakers on a vertical and flat wall where reinforcement is applied. • Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. - Page 19 Fasten the screws to the wall. BDV-T10/BDV-T11 For the center speaker 8 to 10 mm inch) For the other speakers 8 to 10 mm inch) Hang the speakers on the screws. 5 mm 10 mm Rear of the speaker BDV-E300 For the center speaker 160 mm inches)
-
Page 20: Step 2: Connecting The System
Step 2: Connecting the System For connecting the system, read the information on the following pages. Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other connections are made. Note •... -
Page 21: Connecting The Tv (Video Connection)
Connecting the TV (Video connection) This connection sends a video signal to the TV. Depending on the jacks on your TV, select the connection method. Rear panel of the unit F R O N K E R S P E A O O F E S U B W C E N T... -
Page 22: Connecting The Tv (Audio Connection)
Connecting the TV (Audio connection) This connection sends an audio signal to the unit from the TV. To listen to TV sound via the system, perform this connection. Rear panel of the unit P O N C O M ( 1 0 0 L A N F R O N F R O N... -
Page 23: Connecting The Other Components
Connecting the other components You can enjoy connected components via the system’s speakers. • DIGITAL MEDIA PORT adapter: F (TDM-iP20 is supplied. You can also use other DIGITAL MEDIA PORT adapters.) • VCR, digital satellite receiver, PlayStation, or portable audio source, etc. (not supplied): G •... - Page 24 If your TV has multiple audio/video inputs You can enjoy sound with the speakers of the system through the connected TV. Connect the components as follows. System Select the component on the TV. For details, refer to the operating instructions of the TV. If the TV does not have multiple audio/video inputs, a switcher will be necessary to receive sound from more than one component.
-
Page 25: Connecting The Antenna (Aerial)
Connecting the antenna (aerial) To assemble the AM loop antenna (aerial) To connect the antenna (aerial) Rear panel of the unit N N A A N T E IA L 75 C O A X - T 1 0 E Z W A U D IO L M IC A . - Page 26 Inserting the external memory Insert the external memory device (1 GB or larger USB flash memory, such as Sony USM2GL, USM4GL, or USM1GH, not supplied) into the EXT slot. Check that “EXT” lights up in the front panel display when turning the system on. By connecting an external memory, you can enjoy additional contents (BonusView/BD-Live) depending on the disc (page 43).
-
Page 27: Connecting To The Network
Connecting to the network Connect the LAN (100) terminal of the unit to your Internet source using a network cable to update the system’s software using the network. You can also enjoy BD-Live (page 43). Make the appropriate settings in [Internet Settings] under [Network Settings] (page 84). COMPONENT VIDEO OUT LAN(100) SPEAKER... - Page 28 Connecting the AC power cord (mains lead) Before connecting the AC power cord (mains lead) of the unit to a wall outlet (mains), connect all the speakers to the unit. Wall outlet (mains): The shape of the wall outlet (mains) differs depending on the area.
-
Page 29: Step 3: Performing The Easy Setup
Step 3: Performing the Easy Setup Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the country model. C/X/x/c, Turn on the TV. Press [/1 on the unit. Switch the input selector on your TV so that the signal from the system appears on the TV screen. -
Page 30: Output Resolution
Note • When you do not connect the unit and TV with an HDMI cable, you cannot select [HDMI]. • When connecting the HDMI OUT jack and other video output jacks at the same time, select [Component Video]. • For details about video output resolution, see “Video Output Resolution”... - Page 31 You can operate this unit in conjunction with a TV connected by HDMI. Check your TV settings when using this function. Select [On] to use the [Control for HDMI] function (page 63) when connecting Sony components that are compatible with the Control for HDMI function.
-
Page 32: Step 4: Selecting The Source
Press [Auto Calibration] starts. The system adjusts the speaker setting automatically. Be quiet during the measurement. Note • Loud test sound is output when [Auto Calibration] starts. You cannot turn the volume down. Give consideration to children and neighbors. • Before [Auto Calibration], install the surround amplifier in the appropriate location. -
Page 33: Step 5: Enjoying Surround Sound
Step 5: Enjoying Surround Sound You can enjoy surround sound simply by selecting one of the system’s pre-programmed decoding modes. They bring the exciting and powerful sound of movie theaters into your home. X/x/c, Selecting surround sound effects based on your listening preference Press SYSTEM MENU. - Page 34 About speaker output The table below describes the options when you connect all the speakers to the unit. The default setting is “A.F.D. 7.1CH” (when connecting the headphones to the surround amplifier, the default setting is “HP 2CH”). Sound from Surround effect Depending on the source.
- Page 35 Sound from Surround effect “HP 2CH” (HEADPHONE 2 CHANNEL STEREO) To turn the sound effect off Select “A.F.D. STD” for “DEC. MODE.” Note • When you select “A.F.D. 7.1CH,” depending on the disc or source, the beginning of the sound may be cut off while the optimum mode is automatically selected.
-
Page 36: Playback
Playback Playing a BD/DVD Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. "/1 Disc tray ONE-TOUCH PLAY SUBTITLE DISPLAY TOP MENU C/X/x/c, HOME FUNCTION SCENE SEARCH MUTING VOLUME +/–... - Page 37 Note • When you set the [Control for HDMI] function to [On], the TV that is connected to the system with an HDMI cable can be sync-operated with the system. For details, see “Using the Control for HDMI Function for “BRAVIA” Sync” (page 63). •...
-
Page 38: Changing The Angles
One-Touch Play (for HDMI connection only) Press ONE-TOUCH PLAY. The system and the connected TV turn on and the input selector on the TV is switched to the system; then you can enjoy the contents of a disc. Note • When using the HDMI connection, there may be a delay before the playback picture appears on the screen, and the beginning portion of the playback picture may not be displayed. - Page 39 Resuming playback from the point where you stopped the disc (Resume Play) When you stop the disc, the system remembers the point where you pressed x. As long as you do not remove the disc, Resume Play will work even if the system is set to standby mode by pressing "/1.
- Page 40 Searching for a scene quickly (Scene Search) You can move quickly between scenes within the title currently being played back. Press SCENE SEARCH during playback or in pause mode. Playback pauses and a bar with a scene indicator (square-shaped – indicates the current point) appears at the bottom of the screen.
- Page 41 Displaying the playing time and play information You can check the title information, including the video transmission rate, etc. Press DISPLAY during playback. The displayed information differs depending on the disc type and system status. Example: When playing a BD-ROM Angle Angle English...
- Page 42 Adjusting pictures for videos Press OPTIONS during playback. The options menu appears. Press X/x to select [Video Settings], then press The [Video Settings] screen appears. Video Settings Select the item you want to change. Picture Quality Mode Standard Press X/x to select an item, then press [Picture Quality Mode] Optimizes the picture settings for different lighting environments.
-
Page 43: Enjoying Bonusview/Bd-Live
Enjoying BonusView/BD- Live Some BD-ROMs with “BD-LIVE Logo*” have bonus contents and other data that can be downloaded to the external memory (local storage) for enjoyment. If a disc is inserted, remove the disc from the unit. Turn the system off. Insert the external memory (not supplied) into the EXT slot on the rear of the unit. -
Page 44: Playing A Cd
Playing a CD C/X/x/c, HOME FUNCTION MUTING VOLUME +/– Press FUNCTION repeatedly until “BD/ DVD” appears in the front panel display. Insert a CD. The Music Player screen appears. Press N. Playback starts. Music CD Current track number and elapsed time Adjust the volume by pressing VOLUME +/–. -
Page 45: Playing Photo Files
Available OPTIONS Press OPTIONS. The options menu appears. Press X/x to select an item, then press The available items differ depending on the disc type or system situation. Items Details [Play] Plays the selected track. [Play from beginning] Plays the current track from (during playback) the beginning. -
Page 46: Available Options
• Large photo files may take some time to display or to start a slideshow. To view images in high picture quality If you have a Sony TV compatible with “PhotoTV HD,” you can enjoy images in high picture quality by the following connection and setting. -
Page 47: Sound Adjustment
• “MOVIE”: The system provides the sound for movies. • “MOVIE-D.C.S.-”*: The system reproduces the sound characteristics of the Sony Pictures Entertainment “Cary Grant Theater” cinema production studio. • “MUSIC”: The system provides the sound for music. -
Page 48: Selecting The Audio Format, Multilingual Tracks, Or Channel
Selecting the Audio Format, Multilingual Tracks, or Channel When the system is playing a BD/DVD VIDEO recorded in multiple audio formats (PCM, Dolby Digital, MPEG audio, or DTS), you can change the audio format. If the BD/DVD VIDEO is recorded with multilingual tracks, you can also change the language. -
Page 49: Enjoying Multiplex Broadcast Sound
Enjoying Multiplex Broadcast Sound (DUAL MONO) You can enjoy multiplex broadcast sound when the system receives or plays a Dolby Digital multiplex broadcast signal. Note • To receive the Dolby Digital signal, you need to connect a TV or other component to the unit with an optical or coaxial digital cord (pages 22, 23) and set the digital output mode of the TV or other component to Dolby Digital. - Page 50 Enjoying sound at low volume You can enjoy sound effects or dialog, as you would in a movie theater, even at low volume. It is useful for watching movies at night. Press NIGHT. “NIGHT ON” appears in the front panel display and the sound effect is activated.
-
Page 51: Tuner
Current station Current band and preset number FM 7 88.00 SONY RADIO Station name • You can operate the tuner function using the tuner menu on the front panel display. See “Operating the tuner function using the system menu” (page 53) Press FUNCTION repeatedly until “TUNER FM”... -
Page 52: Presetting Radio Stations
To view the station name or frequency in the front panel display When the system is set to “TUNER FM” or “TUNER AM,” you can check the frequency using the front panel display. Press DISPLAY. Each time you press DISPLAY on the remote, the display changes as shown. -
Page 53: Using The System Menu
To operate by using D.TUNING Press FUNCTION repeatedly until “TUNER FM” or “TUNER AM” appears in the front panel display. Press D.TUNING. Press the number buttons to select the frequencies. Press If an FM program is noisy If an FM program is noisy, you can select monaural reception. - Page 54 To change the preset number Select the desired preset number by pressing PRESET +/–, then perform the procedure from Step 3. If an FM program is noisy If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve.
-
Page 55: External Audio Device
External Audio Device Using the DIGITAL MEDIA PORT Adapter The DIGITAL MEDIA PORT (DMPORT) adapter is for enjoying sound from a portable audio source or computer. By connecting a DIGITAL MEDIA PORT adapter, you can enjoy sound from the connected component on the system. -
Page 56: Using An S-Air Product
Using an S-AIR Product The unit is compatible with the S-AIR function (page 116), which allows sound transmission between S-AIR products. When you purchase the S-AIR product, you need to perform the following settings to establish the sound transmission. About S-AIR products There are two types of S-AIR product. - Page 57 S-AIR sub unit, such as a surround amplifier or S-AIR receiver, see the operating instructions of the S-AIR sub unit. • When you change the S-AIR configuration, Sony recommends that you perform [Auto Calibration]. For details, see “Calibrating the Appropriate Settings...
- Page 58 S-AIR main unit (This unit) ID A S-AIR sub unit To set the ID of the surround amplifier Refer to the operating instructions of the surround amplifier. To set the ID of the S-AIR receiver Refer to the operating instructions of the S-AIR receiver.
- Page 59 “MAIN UNIT” t “TUNER FM” t “TUNER AM” t “DMPORT” t “AUDIO” t … To enjoy the same function as the unit, select “MAIN UNIT.” When “TUNER FM” or “TUNER AM” is selected on the unit, you can only select the same band on the S-AIR receiver.
- Page 60 Identifying the unit with a specific S-AIR sub unit (Pairing operation) For the surround amplifier For the S-AIR receiver It is easy to set the same ID for the unit and an S-AIR sub unit, such as a surround amplifier or S-AIR receiver, to establish sound transmission.
-
Page 61: The Unit
Press X/x repeatedly until “START” appears in the front panel display, then press The unit starts pairing and “SEARCH” flashes in the front panel display. To cancel pairing, press SYSTEM MENU. Start pairing of the S-AIR sub unit. x For the surround amplifier Press POWER on the surround amplifier to turn on the surround amplifier and press PAIRING on the rear panel of the surround... - Page 62 Press X/x to select the desired setting. • “AUTO”: Normally select this. The system changes “RF CHANGE” to “ON” or “OFF” automatically. • “ON”: The system transmits sound by searching for a better channel for transmitting. • “OFF”: The system transmits sound by fixing the channel for transmitting.
-
Page 63: Other Operations
HDMI function may not work. Refer to the operating instructions supplied with the component. • The Control for HDMI function may not work if you connect a component other than Sony, even if the component is compatible with the Control for HDMI function. - Page 64 To set the [Control for HDMI] function of the system to on/off manually Press HOME. The home menu appears on the TV screen. Press C/c to select Press X/x to select [HDMI Settings], then press The options for [HDMI Settings] appear. Press X/x to select [Control for HDMI], then press Press X/x to select the setting, then...
- Page 65 Enjoying TV sound from the speakers in this system (System Audio Control) You can enjoy TV sound in this system by easy operation. To use this function, connect the system and the TV with an audio cord and an HDMI cable (page 21).
-
Page 66: Calibrating The Appropriate Settings Automatically
Calibrating the Appropriate Settings Automatically [Auto Calibration] D. C. A. C. (Digital Cinema Auto Calibration) can set the appropriate surround sound automatically. Note • The system outputs a loud test sound when [Auto Calibration] starts. You cannot turn the volume down. -
Page 67: Setting The Speakers
Confirm the conclusions of [Auto Calibration]. The conclusions appear on the TV screen. Press C/c to change the page. The first page shows the distance of speakers. The second page shows the level of speakers. Note • If measurement fails, follow the message then retry [Auto Calibration]. - Page 68 [Subwoofer] [Yes] x [Distance] When you move the speakers, be sure to set the parameters of the distance (A) from the listening position to the speakers. You can set the parameters from 0 to 23 feet (0.0 to 7.0 meters). The speakers in the illustration correspond to the following: 1Center speaker...
-
Page 69: Controlling Your Tv With The Supplied Remote
By adjusting the remote signal, you can control your TV with the supplied remote. Note • When you replace the batteries of the remote, the code number may reset itself to the default (SONY) setting. Reset the appropriate code number. Preparing the remote for controlling the TV Press and hold TV [/1 while entering your TV’s manufacturer’s code (see the table) - Page 70 Change the aspect ratio of the connected TV. C/X/x/c, Select the item on the menu. DISPLAY Display the information. • The function of these buttons are same as the remote buttons of the SONY TV. For details, refer to the operating instructions of the TV.
-
Page 71: Using The Sleep Timer
Using the Sleep Timer You can set the system to turn off at a preset time, so you can fall asleep listening to music. You can preset the time in 10-minute increments. Press SYSTEM MENU. Press X/x repeatedly until “SLEEP MENU”... -
Page 72: Deactivating The Buttons On The Unit
Deactivating the Buttons on the Unit (Child Lock) You can deactivate the buttons on the unit (except for "/1) for preventing misoperation, such as child mischief (child lock function). Press x on the unit for more than 5 seconds. “ ON”... -
Page 73: Saving Power In Standby Mode
Saving Power in Standby Mode Check that the following settings are made: – [Control for HDMI] is set to [Off] (page 63). – “S-AIR STBY” is set to “STBY OFF” (page 59). – “DEMO” is set to “DEMO OFF” (page 72). –... -
Page 74: Settings And Adjustments
Settings and Adjustments Using the Setup Display You can make various adjustments of items such as picture and sound. Select (Setup) on the home menu when you need to change the settings of the system. Note • Playback settings stored in the disc take priority over the Setup Display settings and not all the functions described may work. -
Page 75: [Network Update]
You can update and improve the functions of the system. For information about update functions, refer to the following website: http://esupport.sony.com Note • Do not disconnect the AC power cord (mains lead) or 4 : 3 network cable while downloading or updating Original software. -
Page 76: [Video Settings]
Updating the system’s software using an update disc You can update and improve the functions of the system using an update disc provided by a Sony dealer or local authorized Sony service facility. Insert the update disc. The display asks for confirmation. - Page 77 x [Cinema Conversion Mode] You can set the video conversion method for 480p, 720p, 1080i, or 1080p* signals from the HDMI OUT jack or the COMPONENT VIDEO OUT jacks. * HDMI only [Auto]: Normally select this. The unit automatically detects whether the material is video-based or film-based, and switches to the appropriate conversion method.
-
Page 78: [Audio Settings]
[Off]: Select this when your TV is not compatible with 1080/24p video signals. Note • Video signals may not be output when [BD-ROM 1080/24p Output] is set to [On]. x [YCbCr/RGB (HDMI)] You can set the color setting for video signals output from the HDMI OUT jack. - Page 79 x [Attenuate - AUDIO] Distortion may occur when you listen to a component connected to the AUDIO (AUDIO IN L/R) jacks. You can prevent distortion by reducing the input level on the unit. Distortion is not a malfunction and will depend on the component connected.
-
Page 80: [Bd/Dvd Viewing Settings]
[BD/DVD Viewing Settings] You can make detailed settings for BD/DVD playback. x [BD/DVD Menu] You can select the default menu language for BD-ROMs or DVD VIDEOs. When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language by referring to “Language Code List”... - Page 81 x [Parental Control Region Code] Playback of some BD-ROMs or DVD VIDEOs can be limited according to the geographic area. Scenes may be blocked or replaced with different scenes. Enter your four-digit password using the number buttons. Press X/x to select [OK], then press Press X/x to select the area restriction, then press When you select [Select Region Code], the...
-
Page 82: [Photo Settings]
[Photo Settings] You can make the photo-related settings. x [Slideshow Speed] You can change the slideshow speed. [Fast]: Photos change rapidly. [Normal]: Photos change at normal speed. [Slow]: Photos change slowly. [HDMI Settings] You can make the HDMI settings. x [Control for HDMI] You can set the [Control for HDMI] function to on/off. -
Page 83: [System Settings]
[System Settings] You can make the system-related settings. x [OSD] You can select your language for the system on- screen displays. x [Standby Mode] You can shorten the startup time when turning the system on. [Quick Start]: Shortens the startup time from standby mode. -
Page 84: [Network Settings]
[Network Settings] You can make detailed settings for Internet and network. x [Internet Settings] These items are necessary when you connect to the Internet via a network cable. Enter the respective (alphanumeric) values for your broadband router or Wireless LAN router. The items that need to be set may differ, depending on the Internet service provider or the router. -
Page 85: [Easy Setup]
You can use the following buttons to enter characters. Buttons Details Switches the keyboard between [Letter Type] alphabet and numbers. GREEN Switches the keyboard between [A/a] upper case and lower case. BLUE Displays the keyboard for [Symbol] symbols. YELLOW The input is entered, and the [Finish] system returns to the previous display. -
Page 86: [Resetting]
[Resetting] Resetting the system settings other than the settings related to password You can reset the system settings to their factory default. Settings can be reset by function group. All the settings within the group will be reset. Press to select [Reset to Factory Default Settings], then press Press X/x to select the settings you want to reset to default, then press... -
Page 87: Additional Information
If you have any questions or problems concerning your system, please consult your nearest Sony dealer. On cleaning discs, disc/lens cleaners • Do not use cleaning discs or disc/lens cleaners (including wet or spray types). -
Page 88: Notes About The Discs
On moving the system Before moving the system, make sure that there is no disc inserted, and remove the AC power cord (mains lead) from the wall outlet (mains). Notes about the Discs On handling discs • To keep the disc clean, handle the disc by its edge. -
Page 89: Troubleshooting
Note that if service personnel changes some parts during repair, these parts may be retained. In the event of a problem with the S-AIR function, have a Sony dealer check the entire system together (S-AIR main unit and sub unit). - Page 90 Symptom The picture is not output correctly. Picture noise appears. Even though you set the aspect ratio in [TV Type] of [Video Settings], the picture does not fill the TV screen. Color irregularity occurs on the TV screen. Sound Symptom There is no sound.
- Page 91 Symptom Remedy The surround effect is difficult to • Check the decoding mode setting hear when you are playing a • Check the speaker connections and settings (pages 20, 67). sound track of Dolby Digital, • Depending on the BD/DVD, the output signal may not be the entire 5.1 channel. DTS, or MPEG audio.
- Page 92 (mains lead) from the wall outlet (mains), then reconnect after several minutes. • Contact your Sony dealer or local authorized Sony service facility. • Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes.
- Page 93 Symptom Remedy The Control for HDMI function • When “HDMI” does not light up in the front panel display, check the HDMI does not work. connection (page 21). • Set [Control for HDMI] in [HDMI Settings] to [On] (page 82). •...
- Page 94 The S-AIR function Symptom S-AIR connection is not established (sound transmission is not established), e.g., the indicator of the S-AIR sub unit does the following: • Turns off. • Flashes. • Turns red. No sound is heard from the S-AIR sub unit. There is noise or the sound skips.
-
Page 95: Self-Diagnosis Function
If the system does not work normally, consult your nearest Sony dealer or local authorized Sony service facility. When just appears without any messages on the entire screen Contact your nearest Sony dealer or local authorized Sony service facility. -
Page 96: Playable Discs
Playable Discs Type Disc logo Blu-ray Disc DVD VIDEO DVD/DATA DVD AVCHD DATA CD * JPEG format conforming to UDF (Universal Disk Format). ** Some AVCHD format discs may not play, depending on the recording condition. The AVCHD format disc will not play if it has not been correctly finalized. - Page 97 • A disc recorded in a color system other than NTSC, such as PAL (this system conforms to the NTSC color system). Note on playback operations of a BD/DVD Some playback operations of a BD/DVD may be intentionally set by software producers. Since this system plays a BD/DVD according to the disc contents the software producers designed, some playback features may not be available.
-
Page 98: Supported Audio Formats
Supported Audio Formats Audio formats supported by this system are as follows. Format LPCM 2ch Function “BD/DVD” “SAT/CABLE” “TV” (DIGITAL IN) a: Supported format. –: Unsupported format. * BD only. Note • The table above is valid only when you set [BD Audio Setting] to [Direct] (page 78) and [Sound Effect] to [Off] (page 79). -
Page 99: Video Output Resolution
Video Output Resolution Output resolution differs depending on the [Output Video Format] setting in [Video Settings] (page 76). When [Output Video Format] is set to [HDMI] Resolution COMPONENT setting VIDEO OUT jack 480i 480i 480p 480i 720p 480i 1080i 480i 1080p no picture * Protected contents on DVDs are output at 480p resolution. -
Page 100: Specifications
Specifications Amplifier Section (BDV-T10/BDV-T11) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC Output Power) for the US model Front L/Front R: Surround mode (reference) RMS output power * Depending on the decoding mode settings and the source, there may be no sound output. Amplifier Section (BDV-E300) POWER OUTPUT AND TOTAL HARMONIC... - Page 101 Mass (approx.) 0.52 kg (1 lb 3 oz) Center (SS-CTB92) Speaker system Full range, Magnetically Shielded Speaker unit 30 mm × 60 mm (1 in) cone type Rated impedance 3 ohms Dimensions (approx.) 380 mm × 50 mm × 64 mm (15 in ×...
-
Page 102: Language Code List
Language Code List The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language 1027 Afar 1028 Abkhazian 1032 Afrikaans 1039 Amharic 1044 Arabic 1045 Assamese 1051 Aymara 1052 Azerbaijani 1053 Bashkir 1057 Byelorussian 1059 Bulgarian 1060 Bihari 1061 Bislama 1066 Bengali;... -
Page 103: Terms And Conditions Of Use And End User License Agreement
The Software contains a functionality by which it is updated automatically when the Product is connected to a server belonging to Sony or to a third party designated by Sony. When you specify your intention not to use this automatic update functionality, or when the... - Page 104 6. Changes to Service Sony reserves the right to discontinue one, some, or all of the features of the Service you receive at any time at its discretion. Sony may, at its discretion and from time to time change, add or remove features and functionality, upgrade or modify the Service, Site and/ or Software without notice.
-
Page 105: Software License Information
Sony and you with respect to your use of the Product, Service, Site, Content, and Software. Any notice by Sony hereunder may be made by letter, email, or posting on the Service or Site. Any cause of action you may have with respect to your use of this Site must be commenced within one (1) year after the claim or cause of action arises. - Page 106 We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software.
- Page 107 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’...
- Page 108 You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program ‘Gnomovision’...
- Page 109 Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it).
- Page 110 c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
- Page 111 This product contains OpenSSL (including the library Original SSLeay), which Sony uses under license with the copyright holder. In compliance with a request by the copyright holder of said software, Sony conveys the following notice and asks that you read Package name: sony-target-grel-openssl-0.9.8g-020201.src.rpm OpenSSL Copyright (c) 1998-2006 The OpenSSL Project.
- Page 112 Notice about JPEG Parts of this product utilize the research results of the Independent JPEG Group. Package name sony-target-grel-libjpeg-6b-020201.src.rpm. In plain English: 1. We don’t promise that this software works. (But if you find any bugs, please let us know!) 2.
- Page 113 Permission is NOT granted for the use of any IJG author’s name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as “the Independent JPEG Group’s software”. We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are assumed by the product vendor.
-
Page 114: Glossary
In collaboration with Sony Pictures Entertainment, Sony measured the sound environment of their studios and integrated the data of the measurement with Sony DSP (Digital Signal Processor) technology to develop “Digital Cinema Sound.” “Digital Cinema Sound” simulates in a home theater an ideal movie theater sound environment based on the preference of the movie director. - Page 115 since all the signals are processed digitally, less signal degradation occurs. Dolby Digital Plus Developed as an extension to Dolby Digital, the audio coding technology supports 7.1 multi- channel surround sound. Dolby Pro Logic II Dolby Pro Logic II creates five full-bandwidth output channels from 2 channel sources.
- Page 116 PhotoTV HD “PhotoTV HD” allows for a highly-detailed pictures, and photo-like expression of subtle textures and colors. By connecting Sony “PhotoTV HD” compatible devices using an HDMI cable, whole new world of photos can be enjoyed in breathtaking Full HD quality. For...
-
Page 117: Index
Index Numerics 24p True Cinema 116 A/V SYNC 42 ANGLE 38 Attenuate - AUDIO 79 Attenuate - TV 78 Audio 80 Audio DRC 78 Audio Settings 78 Auto Calibration 66, 79 Auto Display 83 AVCHD 96, 114 BD Audio Setting 78 BD Data 43 BD Internet Connection 81 BD Parental Control 80...