Advertisement

QQ
3 7 63 1515 0
SERVICE MANUAL
Ver. 1.4 2006.03
HCD-DZ100 is the amplifier, DVD/CD and
tuner section in DAV-DZ100.
This system incorporates with Dolby*
Pro Logic (II) adaptive matrix surround decoder and the
2
DTS*
Digital Surround System.
*1 Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories.
*2 Manufactured under license from Digital Theater
Systems, Inc.
TE
L 13942296513
"DTS" and "DTS Digital Surround" are trademarks of
Digital Theater Systems, Inc.
AUDIO POWER SPECIFICATIONS
for the US model
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
Amplifier section
North American model:
Surround mode (reference) music power output
Other models:
Stereo mode (rated)
www
.
Sony Corporation
9-879-674-05
Home Audio Division
2006C16-1
Published by Sony Techno Create Corporation
© 2006.03
http://www.xiaoyu163.com
1
Digital and Dolby
Surround mode (reference) music power output
With 3 ohm loads, both
channels driven, from
200 – 20,000 Hz; rated
55 watts per channel
minimum RMS power,
with no more than 0.7 %
total harmonic distortion
* Depending on the sound field settings and the source,
from 250 milli watts to
there may be no sound output.
rated output.
Inputs
VIDEO/SAT (AUDIO IN) Sensitivity: 250/450 mV
TV
Front: 120 W + 120 W
(with SS-TS31)
Center*: 120 W
DVD system
(with SS-CT31)
Surround*: 120 W + 120
Laser
W
(with SS-TS31B)
Subwoofer*: 120 W
(with SS-WS31)
Signal format system
55 W + 55 W (3 ohms at 1
North American, Latin, and Mexican models:
kHz, DIN)
x
ao
u163
y
i
http://www.xiaoyu163.com
HCD-DZ100
2 9
8
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Name
Q Q
3
6 7
1 3
1 5
SPECIFICATIONS
Front: 120 W + 120 W
(with SS-TS31)
Center*: 120 W
(with SS-CT31)
Surround*: 120 W + 120
W
(with SS-TS31B)
Subwoofer*: 120 W
(with SS-WS31)
Impedance: 50 kilohms
(EXCEPT AEP, UK, RU)
Sensitivity: 450 mV
Impedance: 50 kilohms
(AEP, UK, RU)
Semiconductor laser
(DVD: λ = 650 nm)
(CD: λ = 790 nm)
Emission duration:
continuous
NTSC
SUPER AUDIO CD/DVD RECEIVER
co
.
9 4
2 8
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
HCD-DZ300
CDM85-DVBU102
KHM-310CAA/C2NP
0 5
8
2 9
9 4
2 8
Other models:
NTSC/PAL
Frequency response (at 2 CH STEREO mode)
DVD (PCM): 2 Hz to 22
kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0
dB)
Tuner section
System
PLL quartz-locked digital
synthesizer system
FM tuner section
Tuning range
North American model:
87.5 – 108.0 MHz
(100 kHz step)
Other models:
87.5 – 108.0 MHz
(50 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
I
ntermediate frequency
10.7 MHz
AM tuner section
Tuning range
North American, Latin, and Mexican models:
530 – 1,710 kHz (with the
interval set at 10 kHz)
531 – 1,710 kHz (with the
interval set at 9 kHz)
— Continued on next page —
m
9 9
9 9

Advertisement

Table of Contents
loading

Summary of Contents for Sony HCD-DZ100

  • Page 1 Canadian Model AEP Model UK Model Ver. 1.4 2006.03 E Model Australian Model HCD-DZ100 is the amplifier, DVD/CD and tuner section in DAV-DZ100. This system incorporates with Dolby* Digital and Dolby Model Name Using Similar Mechanism HCD-DZ300 Pro Logic (II) adaptive matrix surround decoder and the...
  • Page 2 HCD-DZ100 Ver. 1.2 3 7 63 1515 0 Middle eastern models: 531 – 1,602 kHz (with the Laser component in this product is capable of emitting radiation interval set at 9 kHz) exceeding the limit for Class 1. Other models: 530 –...
  • Page 3: Table Of Contents

    LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
  • Page 4: Servicing Note

    To prevent a malfunction, the system has performed the self- u163 (xx is a number) diagnosis function. ,Contact your nearest Sony dealer or local authorized Sony service facility and give the 5- character service number. Example: E 61 10 http://www.xiaoyu163.com...
  • Page 5 HCD-DZ100 3 7 63 1515 0 • SERVICE POSITION (DMB11 BOARD) When servicing side B of the DMB11 board Remove the DMB11 board from bracket. (Refer to DISASSEMBLY 3-6. (page 13)). Set the DMB11 board facing the side B upward as shown.
  • Page 6: General

    HCD-DZ100 SECTION 2 3 7 63 1515 0 GENERAL This section is extracted from instruction manual. Front panel A "/1 (on/standby) (20, 24, 62) G ./> (24) B Disc tray (24) H FUNCTION (24) C A (open/close) (24, 62)
  • Page 7 HCD-DZ100 3 7 63 1515 0 Rear panel (EXCEPT AEP, UK, RU) VIDEO/SAT COMPONENT VIDEO OUT DVD ONLY S VIDEO (DVD ONLY) AUDIO IN FRONT R FRONT L SURR R SURR L CENTER WOOFER VIDEO MONITOR OUT COAXIAL SPEAKER...
  • Page 8 HCD-DZ100 3 7 63 1515 0 J TOP MENU (33) Remote (EXCEPT AEP, UK, RU) K C/X/x/c/ENTER (25, 31, 51, 55, 61, 65, L O RETURN (34) REPLAY, STEP (29) N . PRESET –, TV CH – (26, 29, 59, 63) O m/ SLOW, TUNING –...
  • Page 9 HCD-DZ100 3 7 63 1515 0 J C/X/x/c/ENTER (20, 26, 49, 53, 62, 63) Remote (AEP, UK, RU) K O RETURN (29) REPLAY, STEP (24) M . PRESET –, TV CH – (21, 24, 57, 60) N m/ SLOW, TUNING – (39, 59) O H (play) (24) button has a tactile dot.*...
  • Page 10: Disassembly

    HCD-DZ100 SECTION 3 3 7 63 1515 0 DISASSEMBLY 3-1. DISASSEMBLY FLOW • This set can be disassembled in the order shown below. 3-2. CASE, FRONT PANEL ASSY (Page 11) 3-6. DMB11 BOARD 3-3. FL BOARD 3-5. I/O BOARD, DC FAN...
  • Page 11: Case, Front Panel Assy

    HCD-DZ100 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 3-2. CASE, FRONT PANEL ASSY 4 screw (CASE3 TP2) 6 five screws (+BV 3) 7 case 5 screw (CASE3 TP2) 9 claw L 13942296513...
  • Page 12: Fl Board

    HCD-DZ100 3 7 63 1515 0 3-3. FL BOARD 1 knob (vol) 8 FL board 2 nut 6 screw (+BVTP 2.6) 5 shield (front) 3 two sheets earth line 4 three screws (+BVTP 2.6) 7 wire (flat type) 19core (CN801) L 13942296513 3-4.
  • Page 13: I/O Board, Dc Fan

    HCD-DZ100 3 7 63 1515 0 3-5. I/O BOARD, DC FAN 3 wire (flat type) 13core (CN201) 4 wire (flat type) 23core (CN601) qs I/O board qa wire (flat type) 11core or 9core (CN101) qf tuner unit qd two screws (+BV 3) q;...
  • Page 14: Main Board

    HCD-DZ100 3 7 63 1515 0 3-7. MAIN BOARD 1 two screws (+BV 3) 2 screw (BVTP 3 × 12) 3 heat sink (AMP) 5 wire (flat type) 7core (CN503) 6 wire (flat type) 23core (CN507) 4 wire (flat type)
  • Page 15: Dvd Mechanism Deck (Cdm85-Dvbu102)

    HCD-DZ100 3 7 63 1515 0 3-8. DVD MECHANISM DECK (CDM85-DVBU102) 1 t hree screws (+BV 3) 2 dmb bracket 3 three screws (+BV 3) 5 DVD mechanism deck (CDM85-DVBU102) core 4 wire (flat type) 5 L 13942296513 3-9. TRAY 1 Move the chuck cam in the direction of the arrow.
  • Page 16: Belt, Ms-203 Board

    HCD-DZ100 3 7 63 1515 0 3-10. BELT, MS-203 BOARD 2 chuck cam 3 belt 4 screw (M 1.7 × 2.5) 1 two claws L 13942296513 7 MS-203 board 6 DC motor 5 three claws u163 http://www.xiaoyu163.com...
  • Page 17: Optical Pick-Up (Khm-310Caa/C2Np)

    HCD-DZ100 3 7 63 1515 0 3-11. OPTICAL PICK-UP (KHM-310CAA/C2NP) 3 two claws 2 chuck cam 1 two claws 4 base unit L 13942296513 8 two insulators 6 four insulator screws 9 two insulators 0 optical pick-up (KHM-310CAA/C2NP) u163...
  • Page 18: Test Mode

    HCD-DZ100 SECTION 4 3 7 63 1515 0 TEST MODE 3. Disc Tray Lock Note 1: Regarding the notification symbol “R” The disc tray lock function for the antitheft of an demonstration Because the number of the operating buttons of this product disc in the store is equipped.
  • Page 19 HCD-DZ100 Ver. 1.3 3 7 63 1515 0 4-4. MIRROR TIME ADJUSTMENT DVD SECTION To enter Mirror Time Adjustment, press 5 “R” button on the remote [TEST DISC LIST] commander. The screen will appear as below. Be sure to use the DVD disc that matches the signal standards of MIRR time Adjust Menu your region.
  • Page 20 HCD-DZ100 3 7 63 1515 0 (3) Select “5. MIRR time Adjust”. (14) Confirm the same values are displayed. If it is not same, return to step 7. Drive Manual Operation MIRR time Adjust Menu 1. Servo Control 2. Track/Layer Jump 1.
  • Page 21 HCD-DZ100 3 7 63 1515 0 4-5. EXECUTING IOP MEASUREMENT (5) Wait until a hexadecimal number appear. Manual Adjust In order to execute mirror time adjustment, the following standard procedures must be followed. 1. Track Balance Adjust: 2. Track Gain Adjust: (1) In standby mode, press three buttons x , A and VOLUME 3.
  • Page 22: Diagrams

    HCD-DZ100 Ver. 1.1 SECTION 5 3 7 63 1515 0 DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For Schematic Diagrams. For Printed Wiring Boards.
  • Page 23 HCD-DZ100 3 7 6 3 1 5 1 5 0 MEMO • Circuit Boards Location TUNER UNIT I/O board DMB11 board MAIN board STBY board MS-203 board 1 3 9 4 2 2 9 6 5 1 3 FL board...
  • Page 24: Block Diagram - Rf/Servo Section

    HCD-DZ100 5-1. BLOCK DIAGRAM – RF/SERVO SECTION – 3 7 6 3 1 5 1 5 0 DVDRFIP DVDA DVDB DETECTOR DVDC DVDD 8 NA 9 NB IC102 (1/3) CD/DVD RF AMP, FOCUS/TRACKING ERROR AMP DVD SYSTEM PROCESSOR • Signal Path...
  • Page 25: Block Diagram - Video Section

    HCD-DZ100 5-2. BLOCK DIAGRAM – VIDEO SECTION – 3 7 6 3 1 5 1 5 0 AEP,UK,RU J203 CROUT R/C OUT CYOUT G OUT CBOUT B OUT VOUT V/Y OUT EURO AV IC201 VIDEO AMP, 75ohm DRIVER BLANK...
  • Page 26: Block Diagram - Amp Section

    HCD-DZ100 5-3. BLOCK DIAGRAM – AMP SECTION – 3 7 6 3 1 5 1 5 0 IC3601 A/D CONVERTER IC4501 BUFFER D1 - D3, SCK, 1 LIN DOUT BCKO, LRCKO AUDIO LRCKO SECTION BCKO (Page 27) R-CH 2 RIN...
  • Page 27: Block Diagram - Audio Section

    HCD-DZ100 5-4. BLOCK DIAGRAM – AUDIO SECTION – 3 7 6 3 1 5 1 5 0 • Signal Path : AUDIO IC108 IC101 STREAM PROCESSOR POWER DRIVER SPEAKER D1 – D3, SCK, BCKO, LRCKO 31 DATA 2 PWMBP...
  • Page 28: Block Diagram - Power Section

    HCD-DZ100 5-5. BLOCK DIAGRAM – POWER SECTION – 3 7 6 3 1 5 1 5 0 T901 D901 TRANSFORMER(MAIN) AC IN D931 IC901 D905 +31.5V Q901 POWER DC/DC VOLTAGE PROTECTION CONVERTER CONTROLLER IC931 T801 VOLTAGE DETECT PC901 PHOTO...
  • Page 29: Q Q

    HCD-DZ100 • See page 23 for Circuit Boards Location. 5-6. PRINTED WIRING BOARD – DMB11 BOARD (SIDE A) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 New part of EEP ROM (IC103) on the DMB11 board cannot be used.
  • Page 30: Printed Wiring Board - Dmb11 Board (Side B)

    HCD-DZ100 • See page 23 for Circuit Boards Location. 5-7. PRINTED WIRING BOARD – DMB11 BOARD (SIDE B) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location AEP,UK,RU D3601...
  • Page 31: Schematic Diagram - Dmb11 Board (1/5)

    HCD-DZ100 5-8. SCHEMATIC DIAGRAM – DMB11 BOARD (1/5) – 3 7 6 3 1 5 1 5 0 FL401 FB402 FB404 JL4601 JL4602 JL4603 JL4604 FL403 FB403 FB406 JL4605 JL4606 JL4607 JL4608 C402 C403 JL4609 JL4610 6.3V CN401 FL402...
  • Page 32: Schematic Diagram - Dmb11 Board (2/5)

    HCD-DZ100 • See page 51 for Waveforms. • See page 58 for IC Pin Function Description. 5-9. SCHEMATIC DIAGRAM – DMB11 BOARD (2/5) – 3 7 6 3 1 5 1 5 0 R1120 R1102 R1121 C152 C153 R1527 C151 0.001...
  • Page 33: Schematic Diagram - Dmb11 Board (3/5)

    HCD-DZ100 Ver. 1.2 5-10. SCHEMATIC DIAGRAM – DMB11 BOARD (3/5) – New part of EEP ROM (IC103) on the DMB11 board cannot be used. 3 7 6 3 1 5 1 5 0 Therefore, if the mounted DMB11 board (A-1121-906-A, etc.) is replaced, exchange new EEP ROM (IC103) with that used before the replacement.
  • Page 34: Schematic Diagram - Dmb11 Board (4/5)

    HCD-DZ100 • See page 52 for IC Block Diagram. 5-11. SCHEMATIC DIAGRAM – DMB11 BOARD (4/5) – 3 7 6 3 1 5 1 5 0 R3611 C3610 16V B R3621 IC3601 C3609 10 16V PCM1803DBR C3611 C3621 0.01 0.01...
  • Page 35: Schematic Diagram - Dmb11 Board (5/5)

    HCD-DZ100 5-12. SCHEMATIC DIAGRAM – DMB11 BOARD (5/5) – 3 7 6 3 1 5 1 5 0 R223 100k R225 R234 100k C209 R221 C211 C212 R232 0.033 0.033 0.01 C233 R230 0.0047 R226 R220 C214 R233 0.001...
  • Page 36: Printed Wiring Board - Main Section (Side A)

    HCD-DZ100 • See page 23 for Circuit Boards Location. 5-13. PRINTED WIRING BOARD – MAIN BOARD (SIDE A) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location D503 D914...
  • Page 37: Printed Wiring Board - Main Board (Side B)

    HCD-DZ100 Ver. 1.2 • See page 23 for Circuit Boards Location. :Uses unleaded solder. 5-14. PRINTED WIRING BOARD – MAIN BOARD (SIDE B) – 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location...
  • Page 38: Schematic Diagram - Main Board (1/7)

    HCD-DZ100 Ver. 1.2 • See page 51 for Waveform. • See page 55 for IC Pin Function Description. 5-15. SCHEMATIC DIAGRAM – MAIN BOARD (1/7) – 3 7 6 3 1 5 1 5 0 CN509 FFC-S-1.0 R628 R608...
  • Page 39: Schematic Diagram - Main Board (2/7)

    HCD-DZ100 5-16. SCHEMATIC DIAGRAM – MAIN BOARD (2/7) – 3 7 6 3 1 5 1 5 0 IC515 TA7809LS TP517 C595 C596 C597 R704 0.33 47 35V R703 IC516 TA7805LS TP518 C602 C601 C598 0.33 47 35V TP538...
  • Page 40: Schematic Diagram - Main Board (3/7)

    HCD-DZ100 • See page 53 for IC Block Diagrams. 5-17. SCHEMATIC DIAGRAM – MAIN BOARD (3/7) – 3 7 6 3 1 5 1 5 0 R345 R347 TP331 R317 R316 R319 TP334 C324 25V F R382 EB907 EB910...
  • Page 41: Schematic Diagram - Main Board (4/7)

    HCD-DZ100 • See page 53 for IC Block Diagrams. 5-18. SCHEMATIC DIAGRAM – MAIN BOARD (4/7) – 3 7 6 3 1 5 1 5 0 IC106 CXD9774M C116 1 16V F C372 1 50V R431 C186 100k 0.033...
  • Page 42: Schematic Diagram - Main Board (5/7)

    HCD-DZ100 • See page 51 for Waveform. • See page 53 for IC Block Diagram. 5-19. SCHEMATIC DIAGRAM – MAIN BOARD (5/7) – 3 7 6 3 1 5 1 5 0 L107 10uH Q303 CN300 2SC3243TP-E C307 100 16V C108 0.1...
  • Page 43: Schematic Diagram - Main Board (6/7)

    HCD-DZ100 • See page 53 for IC Block Diagrams. 5-20. SCHEMATIC DIAGRAM – MAIN BOARD (6/7) – 3 7 6 3 1 5 1 5 0 IC103 Q106 Q108 CXD9774M 2SA1235TP-1EF 2SA1235TP-1EF C113 1 16V C110 0.001 R113 L133...
  • Page 44: Schematic Diagram - Main Board (7/7)

    HCD-DZ100 Ver. 1.2 5-21. SCHEMATIC DIAGRAM – MAIN BOARD (7/7) – 3 7 6 3 1 5 1 5 0 C931 47000P / 630V: CND,MX C938 EXCEPT US,CND,MX 10000P / 630V: EXCEPT US,CND,MX,KR 330P / 250V: US,CND,MX no mount...
  • Page 45: Printed Wiring Board - Panel Section

    HCD-DZ100 • See page 23 for Circuit Boards Location. 5-22. PRINTED WIRING BOARD – PANEL SECTION – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location D801 D802 D803 D804...
  • Page 46: Schematic Diagram - Panel Section

    HCD-DZ100 • See page 55 for IC Block Diagram. 5-23. SCHEMATIC DIAGRAM – PANEL SECTION – 3 7 6 3 1 5 1 5 0 S802 S803 S808 S804 S805 S806 S807 R851 S801 SW. KEY SW. KEY SW. KEY SW.
  • Page 47: Printed Wiring Board - I/O Board

    HCD-DZ100 • See page 23 for Circuit Boards Location. 5-24. PRINTED WIRING BOARD – I/O BOARD – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 EXCEPT AEP,UK,RU EXCEPT AEP,UK,RU • Semiconductor VIDEO Location COMPONENT VIDEO OUT Ref.
  • Page 48: Schematic Diagram - I/O Board (1/2)

    HCD-DZ100 • See page 53 for IC Block Diagram. 5-25. SCHEMATIC DIAGRAM – I/O BOARD (1/2) – 3 7 6 3 1 5 1 5 0 CN101 R624 R608 R650 TP626 6.8k C624 R107 C611 0.001 R635 C626 220p...
  • Page 49: Schematic Diagram - I/O Board (2/2)

    HCD-DZ100 • See page 51 for Waveforms. 5-26. SCHEMATIC DIAGRAM – I/O BOARD (2/2) – 3 7 6 3 1 5 1 5 0 C206 0.001 TP245 TP246 TP247 TP248 L101 TP249 TP250 TP251 C209 TP252 C210 IC201 CN201...
  • Page 50: Printed Wiring Board - Ms-203 Board

    HCD-DZ100 • See page 23 for Circuit Boards Location. 5-27. PRINTED WIRING BOARD – MS-203 BOARD – 5-28. SCHEMATIC DIAGRAM – MS-203 BOARD – 3 7 6 3 1 5 1 5 0 :Uses unleaded solder. MS-203 BOARD CN001...
  • Page 51 HCD-DZ100 3 7 63 1515 0 • Waveforms – I/O Board – – DMB11 Board – IC201 wh (COUT) IC201 qk (CbOUT) IC102 6 (DVDRFIP) (AEP,UK,RU) 1.7 Vp-p 2.0 Vp-p 700 mVp-p 1 V/DIV, 20 µ s/DIV µ 200 mV/DIV, 100 ns/DIV...
  • Page 52 HCD-DZ100 3 7 63 1515 0 • IC Block Diagrams – I/O Board – IC602 MC14052BDR2 L 13942296513 – DMB11 Board – IC3601 PCM1803DBR 5 th Order Single-End MODE1 Delta-Sigma VINL 1 /Differential Modulator MODE0 VINR 2 Converter Serial...
  • Page 53 HCD-DZ100 3 7 63 1515 0 – MAIN Board – IC101-106 CXD9774M GVDD B GVDD GVDD B BST B DVDD DREG DREG GND 1 PVDD B GATE PWM BP 2 PVDD B RECEIVER DRIVE OUT B TIMING GND 3...
  • Page 54 HCD-DZ100 3 7 63 1515 0 – FL Board – IC802 PT6315 Grid driver Multiplexed driver SEG19/GRID10 Command decoder LED1 SEG18/GRID11 LED2 Display memory LED3 SEG17/GRID12 24 bits x 12 words LED4 Timing generator key scan DOUT L 13942296513...
  • Page 55 HCD-DZ100 Ver. 1.2 3 7 63 1515 0 • IC Pin Function Description MAIN BOARD IC509 M30620MCP-A01FPU0/M30620MCP-A15FPU0 (SYSTEM CONTROLLER) Pin No. Pin Name Description DAMP SCDT/ Digital amp (IC108 to 110) data output DIAT_SDATA DAMP SHIFT/ Digital amp (IC108 to 110) data output (not used)
  • Page 56 HCD-DZ100 3 7 63 1515 0 Pin No. Pin Name Description Flash Write CE (not used) DRIVE_RST(EN) Driver signal reset DRIVE_OCP(DIAG) Digital amp (power driver) diag input OVERFLOW1 Over flow status1 of digital amp input (IC110) OVERFLOW2 Over flow status2 of digital amp input (IC108 to 110)
  • Page 57 HCD-DZ100 3 7 63 1515 0 Pin No. Pin Name Description MODEL Model select input KEY2 Key input 2 input KEY1 Key input 1 input — Ground KEY0 Key input 0 input VREF Reference Voltage (+3.3V) Power supply (+3.3V)
  • Page 58 HCD-DZ100 3 7 63 1515 0 DMB11 BOARD IC102 CXD9849R (CD/DVD RF AMP, FOCUS/TRACKING ERR AMP, DVD SYSTEM PROCESSOR, DIGITAL SERVO PROCESSOR) Pin No. Pin Name Description AGND — Terminal Ground DVDA AC coupled input path A DVDB AC coupled input path B...
  • Page 59 HCD-DZ100 3 7 63 1515 0 Pin No. Pin Name Description DSEL — Not Used WIDE Wide switch signal input tenminal Mute signal control input MAMUTE MAMUTE signal output to System Controller (IC509) (not used) DVDD18 — Power Supply (+1.8V)
  • Page 60 HCD-DZ100 3 7 63 1515 0 Pin No. Pin Name Description IR control signal input (not used) INT0 External interrupt0 (not used) DQMO DQM0 signal output to SD-RAM (IC104) MREQ DQM signal input Data bus 7 from SD-RAM (IC104) DVSS —...
  • Page 61 HCD-DZ100 3 7 63 1515 0 Pin No. Pin Name Description — Not Used DVDD18 — Power Supply (+1.8V) — Not Used DVSS — Terminal Ground LIMSW LIMSW signal output to Optical pick-up OCSW SEN signal input from System Controller (IC509)/OCSW signal input VCLK —...
  • Page 62 HCD-DZ100 3 7 63 1515 0 Pin No. Pin Name Description ASDATA2 Auio serial data XRST — Not Used DVDD18 — Power Supply (+1.8V) ASDATA4 Auio serial data (not used) DVSS — Terminal Ground DWIDE — Not Used SDPIF —...
  • Page 63: Exploded Views

    HCD-DZ100 Ver. 1.2 SECTION 6 3 7 63 1515 0 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • The mechanical parts with no reference The components identified by mark 0 or may have some difference from the original number in the exploded views are not supplied.
  • Page 64: Front Panel Section

    HCD-DZ100 Ver. 1.2 3 7 63 1515 0 6-2. FRONT PANEL SECTION not supplied supplied supplied not supplied L 13942296513 including S800 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 2-546-006-11 KNOB (VOL) 2-588-950-31 PANEL, FRONT (US, CND)
  • Page 65: Chassis Section

    HCD-DZ100 Ver. 1.4 3 7 63 1515 0 6-3. CHASSIS SECTION supplied supplied F901 not supplied DVD mechanism deck section L 13942296513 (CDM85-DVBU102) not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-077-331-01 +BV3 (3-CR)
  • Page 66: Dvd Mechanism Deck Section (Cdm85-Dvbu102)

    HCD-DZ100 Ver. 1.3 3 7 63 1515 0 6-4. DVD MECHANISM DECK SECTION (CDM85-DVBU102) not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied L 13942296513 supplied Ref. No. Part No. Description Remark Ref.
  • Page 67: Electrical Parts List

    HCD-DZ100 Ver. 1.3 SECTION 7 DMB11 3 7 63 1515 0 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • RESISTORS When indicating parts by reference number, parts list may be different from the parts All resistors are in ohms.
  • Page 68 HCD-DZ100 Ver. 1.3 DMB11 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C208 1-162-970-11 CERAMIC CHIP 0.01uF FB115 1-414-226-21 INDUCTOR, FERRITE BEAD C209 1-164-677-11 CERAMIC CHIP 0.033uF C210 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 69 HCD-DZ100 DMB11 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R113 1-211-977-11 METAL CHIP 0.5% 1/10W R230 1-218-893-11 METAL CHIP 0.5% 1/10W R114 1-216-845-11 METAL CHIP 100K 1/10W R231 1-218-875-11 METAL CHIP 0.5%...
  • Page 70 HCD-DZ100 DMB11 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3602 1-216-809-11 METAL CHIP 1/10W C813 1-162-960-11 CERAMIC CHIP 220PF C814 1-126-795-11 ELECT 10uF R3603 1-216-833-11 METAL CHIP 1/10W R3605...
  • Page 71 HCD-DZ100 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R816 1-216-809-11 METAL CHIP 1/10W C227 1-126-916-11 ELECT 1000uF 6.3V R817 1-216-821-11 METAL CHIP 1/10W (AEP, UK, RU) R819 1-216-805-11 METAL CHIP...
  • Page 72 HCD-DZ100 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < TRANSISTOR > R228 1-216-833-11 METAL CHIP 1/10W (EXCEPT AEP, UK, RU) Q204 1-801-806-11 TRANSISTOR RT1N441C-TP-1 (AEP, UK, RU) R229 1-218-285-11 METAL CHIP...
  • Page 73 HCD-DZ100 Ver. 1.2 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R650 1-218-867-11 METAL CHIP 6.8K 1/10W C131 1-164-156-11 CERAMIC CHIP 0.1uF (EXCEPT AEP, UK, RU) C132 1-164-156-11 CERAMIC CHIP 0.1uF...
  • Page 74 HCD-DZ100 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C211 1-136-177-00 FILM C308 1-164-156-11 CERAMIC CHIP 0.1uF C212 1-136-177-00 FILM C309 1-164-156-11 CERAMIC CHIP 0.1uF C213 1-136-177-00 FILM C214...
  • Page 75 HCD-DZ100 Ver. 1.2 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 C925 C572 1-107-826-11 CERAMIC CHIP 0.1uF 1-107-974-81 CERAMIC 47PF C580 1-126-916-11 ELECT 1000uF 6.3V C582 1-104-658-91 ELECT...
  • Page 76 HCD-DZ100 Ver. 1.2 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D103 6-500-260-01 DIODE P6SMB39AT3 D104 6-500-260-01 DIODE P6SMB39AT3 < IC > D105 6-500-260-01 DIODE P6SMB39AT3 IC101 6-704-802-01 IC CXD9774M...
  • Page 77 HCD-DZ100 Ver. 1.2 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark L302 1-412-939-11 INDUCTOR R132 1-216-864-11 SHORT CHIP L303 1-216-295-91 SHORT CHIP R133 1-216-864-11 SHORT CHIP L931 1-457-058-11 INDUCTOR 10.8uH...
  • Page 78 HCD-DZ100 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R244 1-216-809-11 METAL CHIP 1/10W R380 1-216-818-11 METAL CHIP 1/10W R245 1-216-809-11 METAL CHIP 1/10W R381 1-216-818-11 METAL CHIP 1/10W...
  • Page 79 HCD-DZ100 Ver. 1.2 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R492 1-216-833-11 METAL CHIP 1/10W R695 1-216-809-11 METAL CHIP 1/10W R493 1-216-833-11 METAL CHIP 1/10W R696 1-216-809-11 METAL CHIP...
  • Page 80 HCD-DZ100 Ver. 1.2 MAIN MS-203 STBY 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R792 1-216-829-11 METAL CHIP 4.7K 1/10W (AEP, UK) R938 1-216-821-11 METAL CHIP 1/10W R792 1-216-833-11 METAL CHIP...
  • Page 81 HCD-DZ100 Ver. 1.3 3 7 63 1515 0 Ref. No. Part No. Description Remark MISCELLANEOUS ************* 1-828-952-11 WIRE (FLAT TYPE) (9 CORE)(EXCEPT AEP, UK) 1-828-962-11 WIRE (FLAT TYPE) (11 CORE) (AEP, UK) 1-787-331-11 FAN, D.C. 1-828-361-11 WIRE (FLAT TYPE) (19 CORE)
  • Page 82 HCD-DZ100 3 7 63 1515 0 MEMO L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 83 HCD-DZ100 3 7 63 1515 0 US Model Canadian Model SERVICE MANUAL AEP Model UK Model E Model Ver. 1.3 2005.11 Australian Model SUPPLEMENT-1 Subject : Addition of ELECTRICAL ADJUSTMENT L 13942296513 u163 9-879-674-81 http://www.xiaoyu163.com...
  • Page 84 HCD-DZ100 ELECTRICAL ADJSTMENT 3 7 63 1515 0 Checking Location: DMB11 board (Side A) DVD SECTION When the base unit is replaced, perform the adjustment and the measurement as shown below in this order. 1) MIRROR TIME ADJUSTMENT (See page 19)
  • Page 85 HCD-DZ100 3 7 63 1515 0 MEMO L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 86 HCD-DZ100 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page.

Table of Contents