Fru Parts List; Fig 1-96 Legend - Xerox DOCUPRINT N4525 Service Quick Reference Manual

FRU Parts List

This topic provides a list of Field Replaceable Units for the DocuPrint
Laser Printer.
Changes to the printer may be made to accommodate improved components as they
become available. When ordering parts and/or supplies, it is important to include the
following information:
Component's part number,


Printer type or model number,


Printer serial number, and


Modification number, if any.


Using the Parts List
1.
The callout numbers shown in each parts exploded illustration correspond to
the parts list numbers for that illustration.
2.
Throughout this manual, parts are identified by the prefix "PL", followed by a
number, a decimal point, and another number. For example, PL9.3.3 means
the part is item 3 of Parts List 9.3.
3.
A black triangle preceding a number followed by a parenthetical statement in
an illustration means the item is an assembly, made up of the individual parts
called out in parentheses.
4.
The notation "with X~Y" following a part name indicates an assembly that is
made up of components X through Y. For example, "1 (with 2~4)" means part 1
consists of part 2, part 3, and part 4.
5.
An asterisk (*) following a part name indicates the page contains a note about
this part.
6.
The notation "J1<>J2 and P2" is attached to a wire harness. It indicates that
connector Jack 1 is attached to one end of the wire harness and connector J2
is attached to the other end that is plugged into P2.
Only parts showing part numbers are available for support.
Note
Parts not showing part numbers are available on the parent
assembly.

Fig 1-96 Legend:

Identifier Meaning
C C-ring
E E-ring
KL E-clip
S Screw
Volume 1 / Print Engine - FRU Parts Lists
®
N4525 Network
1-265