BMW k1200lt Manual page 41

• Pull off plug housing 3
• Release spring clip 4 from
retainers A at top and bottom
and swing the clip back
• Take out the H7 bulb
• Insert a new H7 bulb
– Tab B must point upward
• Engage spring clips 4 at top
and bottom in retainers A
• Seat plug housing 3 on bulb
connections
Changing bulbs
B
A
• Insert cover 2 with wording
TOP facing upward
• Pull clip 1 up until it engages
Make sure that cover 2 is cor-
rectly seated and that it forms a
good seal.
– Low-beam headlight:
H7 12 V 55 W
3
4
2
41