Do not damage brake lines,
brake disk, brake pads and
wheel when removing.
Do not damage the ABS sensor
cable, the ABS sensor ring and
the ABS sensor.
• Remove the four wheel
studs 3 with taper rings 4
• Remove central screw 7 with
taper ring 6
Removing the rear wheel
3
7
• Pull the rear wheel off the cen-
tering spigot and set it down
• Remove spacing washer 5
from the wheel centering
spigot
• Carefully roll the rear wheel
out to the rear
Protect the wheel hub contact
face against dust and dirt.
4
6
2
29
5