Verizon Fios User Manual page 29

WINDOWS 10
1. On the Windows desktop, click on the Start
Settings and click Network & Internet Settings
2. In the Network & Internet, click Ethernet
3. Select Network and Sharing Center Network and Sharing Center. The View your basic
network information and set up connections network information and set up connections window
displays.
4. In the View your active networks View your active networks, click Ethernet
Connections field. The Ethernet Status Connections
5. Click Properties Properties. The Ethernet Properties
6. Select Internet Protocol Version 4 (TCP/IPv4) Internet Protocol Version 4 (TCP/IPv4), then click
Properties. The Internet Protocol Version 4 (TCP/IPv4) Properties
Properties window displays. Properties
7. Click the Obtain an IP address automatically
8. Click the Obtain DNS server address automatically
button, then click OK
9. In the Local Area Connection Properties Local Area Connection Properties window, click OK
save the settings.
10. To configure Internet Protocol Version 6 (TCP/IPv6) to use
dynamic IP addressing, repeat steps 1 to 9. However for
step 6, select Internet Protocol Version 6 (TCP/IPv6)
the Properties Properties option (refer to IPv6 section for Fios Router
configuration).
verizon.com/business/products/fios-internet
Network & Internet.
Ethernet Status window displays.
Ethernet Properties window displays.
Internet Protocol Version 4 (TCP/IPv4)
Obtain an IP address automatically radio button.
Obtain DNS server address automatically radio
OK.
Internet Protocol Version 6 (TCP/IPv6) in
02 / CONNECTING
YOUR FIOS ROUTER
Start icon. Select
Ethernet.
View your basic
Ethernet in the
| ©2020 Verizon. All Rights Reserved
29
OK to