Verizon Fios User Manual page 129

2. Specify the Stateful (DHCPv6)
LAN IPv6 addresses by entering the following details:
• IPv6 LAN Configuration IPv6 LAN Configuration (select Stateful from the
dropdown list)
• LAN Prefix LAN Prefix (automatically populated)
• IPv6 LAN Address IPv6 LAN Address (automatically populated)
• DHCPv6 Client Address Range DHCPv6 Client Address Range (start and end)
• LAN Link Local Address LAN Link Local Address (automatically populated)
• Subnet ID Subnet ID - set the site topology for your internal site
• Router Advertisement Lifetime (minutes between 0-150) Router Advertisement Lifetime
• IPv6 Address Lifetime (minutes between 3-150) IPv6 Address Lifetime
• Option: Allow ICMPv6 Echo Request for LAN devices Option: Allow ICMPv6 Echo Request for LAN devices
using their Global IPv6 Address from WAN side - using their Global IPv6 Address from WAN side
requesting an IPv6 address from any available DHCPv6
servers available on the ISP
3. After entering all appropriate IPv6 settings, click Apply
have changes take effect.
verizon.com/business/products/fios-internet
Stateful (DHCPv6) settings to be used to assign
08 / CONFIGURING
ADVANCED SETTINGS
| ©2020 Verizon. All Rights Reserved
129
Apply to