8.2/
NETWORk SETTINGS
You can configure the following network settings:
•
Network Objects – defines a group, such as a group of
Network Objects
computers.
•
Universal Plug and Play (UPnP) – checks the validity of all UPnP
Universal Plug and Play (UPnP)
services and rules.
•
Port Forwarding Rules
Port Forwarding Rules – displays port forwarding rules.
•
IPv6 – enables IPv6 support.
IPv6
•
Routing – manages the routing and IP address distribution rules.
Routing
•
IPv4/IPv6 Address Distribution - adds computers configured as
IPv4/IPv6 Address Distribution
DHCP clients to the network.
•
Port Configuration – sets up the Ethernet ports as either full- or
Port Configuration
half-duplex ports, at either 10 Mbps, 100 Mbps, or 1000 Mbps.
•
Zenreach AP Service
Zenreach AP Service – provides a quick access to your
Zenreach AP service.
8.2a/
NETWORk OBJECTS
Network objects define a group, such as a group of computers, on
your Fios Router network by MAC address, IP address, and/or host
name. The defined group becomes a network object. You can apply
settings, such as configuring system rules, to all devices defined in
the network object.
verizon.com/business/products/fios-internet
08 / CONFIGURING
ADVANCED SETTINGS
|
©2020 Verizon. All Rights Reserved
115