Regulations Covering Wood Fire Installation - Drolet ESCAPE 1800 Installation And Operation Manual

6.2 Regulations Covering Wood fire Installation

• IT IS RECOMMENDED THAT THE INSTALLATION OF YOUR DROLET WOOD FIRE BE
CARRIED OUT BY A QUALIFIED SPECIALIST INSTALLER. IF ANY ELECTRICAL WORK IS
REQUIRED, IT MUST BE CARRIED OUT BY A LICENSED ELECTRICIAN.
• WARNING: The instructions pertaining to the installation of your wood fire comply with the
AS/NZS 2918:2001 standard. THE APPLIANCE AND FLUE SYSTEM SHALL BE INSTALLED
IN ACCORDANCE WITH AS/NZS 2918:2001 AND THE APPROPRIATE REQUIREMENTS OF
THE RELEVANT BUILDING CODE OR CODES.
• WARNING: APPLIANCES INSTALLED IN ACCORDANCE WITH THIS STANDARD SHALL
COMPLY WITH THE REQUIREMENTS OF AS/NZS 4012/4013 (2014) WHERE REQUIRED
BY THE REGULATORY AUTHORITY, I.E. THE APPLIANCE SHALL BE IDENTIFIABLE BY A
COMPLIANCE PLATE WITH THE MARKING "TESTED TO AS/NZS 4012/4013 (2014)".
• ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN WRITING
BY THE TESTING AUTHORITY IS CONSIDERED TO BE IN BREACH OF THE APPROVAL
GRANTED FOR COMPLIANCE WITH AS/NZS 4012/4013 (2014).
Installation and Operation Manual - Escape 1800 Page 29