Installation Instructions; Installation Procedure; Locating The Fireplace; Figure 2 : Corner Installation - Drolet GRIZZLY Installation And Operation Manual

Here are the steps to follow while installing your new oil burning fireplace.
instructions proposed to you such as clearances.
assured of a simple and secure installation.
INSTALLATION IN Canada HAS TO BE IN ACCORDANCE WITH CAN/CSA B-139 : STANDARDS
INSTALLATION CODE FOR OIL-BURNING EQUIPMENT.
IN THE U.S. THE NFPA 31 STANDARD NATIONAL FIRE PROTECTION ASSOCIATION STANDARD FOR
OIL-BURNING EQUIPMENT IS TO APPLY.
The installation shall be made by a qualified person member of the corporation in force in your area.

1. Locating the fireplace;

2. Respect clearances;
3. Fireplace assembly;
4. Level the fireplace;
5. Chimney installation;
Some advices :
Choose the room where the installation will benefit everyone;
Favour a central area so that the heat will spread-out evenly in your home;
Chimney installation should be as straight as possible.
Many configurations are possible, the most frequent ones are illustrated bellow. (Figure 2 and 3)

Figure 2 : Corner installation

INSTALLATION INSTRUCTIONS

Installation Procedure

Locating the fireplace
In following the instructions of this manual, you will be
6. Connect the oil line;
7. Preliminary test;
8. Inserting the fireplace;
9. Framing the fireplace.

Figure 3 : Wall installation

Page 3 of 23
Pay special attention to the