Access To Sub-Menus; Galvanised Steel; Unit Alone (Am/Gi) (A); Data Display Menu - Trane Tracer CH535 Manual

User interface display

Access to sub-menus

Access using the "Prg" key

FWD

Power supply
Capacities
Cooling capacity on water (1)
Heating capacity on water (2)
Fan motor
Fan power input (3)
Current amps (3)
The sub-menu will be selected using the Up and Down keys and selected using the Enter button.
Start-up amps
Air flow

Data display menu

minimum
nominal
maximum
Show status and values of:
Main coil
Temperature sensors
Water entering/leaving connections
Pressures sensors
Electric heater (accessory for blower only)
Electric power supply
Compressors
Heating capacity
Fans
Hot water coil (accessory for blower only)
Heating capacity (4)
Pump package
G2 filter (filter box accessory)
Quantity Expansion valve
Dimensions ( LxWxth)
Auxiliary heat
G4 filter (filter box accessory)
Quantity
Operating modes
Dimensions ( LxWxth)
Setpoints
Condensate pump (accessory)
Water flow - lift height
Not available for FWD30 and FWD45

Setting menu

Sound level (L/M/H speed)
Sound pressure level (5)
Show status and allows modification of:
Sound power level (5)
Unit dimensions
Local and auxiliary setpoints
Width x Depth
Setpoint offset
Height
Shipped unit dimensions
Operating modes
Width x Depth
Height Circuit manual lockout
Weight
Colour

Clock menu

Recommended fuse size
Unit alone (aM/gI)
Show status and allows modification of:
Unit with electric heater (gI)
Actual date and time adjustment
(1) Conditions: Water entering/leaving temperature: 7/12 °C, Air inlet temperature 27/19°C DB/WB - Nominal air flow
(2) Conditions: Water entering/leaving temperature: 50/45 °C, Air inlet temperature 20°C DB - Nominal air flow
Scheduling
(3) At high speed with nominal air flow.
(4) Water entering/leaving temperature 90/70 °C, air inlet temperature 20 °C DB, Nominal air flow.
(5) A rectangular glass wool duct 1m50 long is placed on the blower.The measurement is taken in the room containing the blower unit.
Figure 6 – Figure 6 – Scheduling

Heat exchanger operating limits:

FWD:
Monday
*water temperature: max 100° C
*absolute service pressure: min 1 bar/max 11 bars
Weekly schedule Start
Accessories - Hot water coil:
Unit Status Unit ON
*water temperature: min. +2° C/max. 100° C
*absolute service pressure: min 1 bar/max 11 bars
00:00
Daily Schedule
Unit Status Unit OFF
Example of scheduling where unit is running from Monday to Friday in a time frame from 6:00 to 18:00
4 16
Technical Data
Data display sub-menu
08
Settings sub-menu
(V/Ph/Hz)
Daily/weekly program sub-menu
(kW) 5,2
Unit configuration sub-menu
(kW) 6,3
(accessible to Trane technicians only, not accessible to end users)
(type)
(kW) 0,23
(A) 1,1
(A) 3,2
(m /h) 490
3
(m /h) 820
3
(m /h) 980
3
(type)
(Dia) 3/4"
(V/Ph/Hz) 230/1/50
(kW) 2/4
(kW) 6,3
(mm) 386x221x8
(mm)
(type)
(l/h - mm)
(dB(A)) 36/40/43
(dB(A)) 46/50/53
(mm) 890 x 600
(mm) 250
(mm) 933 x 644
(mm) 260
(kg) 32
(A) 8/16
(A) 16 (2kW),25 (4kW)
Tuesday Wednesday Thursday
------------ ------------ ------------
Unit ON Unit ON Unit ON
03:00 06:00
Start ------------
Unit OFF Unit ON Unit ON
12
8,3
11,9
0,46
2,2
5,5
980
1650
1970
3/4"
230/1/50 or 400/3/50
8
12
2 2
486x271x8
- 2
- 486x264x48
38/41/44
48/51/54
1090 x 710
300
1133 x 754
310
46
8/16
40 (230V),3*16 (400V)
Friday Saturday
Stop
Unit ON Unit OFF
09:00 12:00 15:00
------------ ------------
Unit ON Unit ON
20 30
230/1/50
15 18,8
18,9 20,9
2 x direct drive centrifugal
0,65 1,04
3,1 4,7
9,3 14,1
1400 1800
2300 3000
2600 3600
ISO R7 rotating female
1 1/2" 1 1/2"
400/3/50 400/3/50
10 12
17,4 22,4
2 2
586x321x8 586*421*8
2 2
586x314x48 586*414*48
Centrifugal
24 - 500
46/50/53 47/52/57
56/60/63 57/62/67
1290 x 820 1290 x 970
350 450
1333 x 864 1333 x 1008
360 460
61 76

galvanised steel

8/16 8/25
3*20 3*25
Sunday
Unit OFF
18:00 21:00
Stop
Unit ON Unit OFF
45
30,1
38,2
1,51
5,5
16,5
2700
4500
5400
1 1/2"
400/3/50
12
34,5
2
586*621*8
2
586*614*48
47/52/58
57/62/68
1290 x 1090
650
1333*1133
660
118
8/25
3*25
00:00
Unit OFF
UNT-PRC002-GB CG-SVU007D-GB