Operation
8.8
Using the door opening monitor
The door opening monitor (optional) displays via an LED (fig. 1 4,page 3) whether
the refrigerator door has been opened.
If the door opening monitor LED illuminates:
1. Open the refrigerator.
2. If necessary, refill the refrigerator.
3. Reset the door opening monitor with the remote control (optional). To do this,
press the red button once (fig. i 1, page 13).
4. Close the refrigerator.
8.9
Defrosting the minibar
The refrigerator is equipped with an automatic defrosting function.
The defrosting phase takes place every 22 hours for a duration of 2 hours.
I
NOTE
The first defrosting phase starts 39 hours after the refrigerator has been
switched on. Start-up during the day ensures that the defrosting phases
occur during nighttime hours.
8.10
Switching off and storing the refrigerator
If you do not intend to use the refrigerator for a long time, proceed as follows:
1. Pull the power plug out of the socket.
2. Clean the refrigerator (see Cleaning and maintenance, page 27).
26
HiPro
EN