Table of Contents
Advertisement
HiPro
HiPro3000, HiPro4000, HiPro6000, HiPro4000Vision
1. Pull the lower hinge out.
2. Pull the door with the hinges out.
3. Remove the hinge pins.
4. Insert the hinge pins on the other side again.
5. Insert the door with the lower hinge again.
I
NOTE
HiPro4000Vision: Insert the door rotated by 180°.
HiPro4000, HiPro4000Vision (for version with high feet)
➤ Screw on the high feet again.
7.5
Install sliding hinge
1. Observe the distances in fig. 0, page 9.
2. Proceed as displayed infig. a, page 9 until fig. b, page 10.
7.6
Install panel plate
1. Observe the installation dimensions in fig. c, page 10.
2. Remove the retaining ring of the lock (optional, fig. d, page 11).
3. Proceed as displayed infig. d, page 11 until fig. e, page 11.
8
Operation
8.1
Before first use
Before first use, clean the minibar inside and outside with a damp cloth for hygienic
reasons (see also Cleaning and maintenance, page 27).
8.2
Saving energy
• Only open the minibar as often and for as long as necessary.
• Allow warm food to cool down first before placing it in the device to keep cool.
• Avoid unnecessarily low temperature settings.
EN
Operation
23
Advertisement
Table of Contents
