Dometic HiPro3000 Installation And Operating Manual page 25

Hide thumbs Also See for HiPro3000:
Table of Contents

Advertisement

HiPro
8.6
Setting the temperature
To avoid food waste, note the following:
• Keep temperature fluctuation as low as possible. Only open the minibar as often
and for as long as necessary. Store the foodstuff in such a way that the air can still
circulate well.
• The minibar is equipped with an automatic temperature regulation function.
Select the average of the possible temperature values.
• Adjust the temperature to the quantity and type of the foodstuff.
The refrigerator is equipped with an automatic temperature regulation function. The
cooling temperature is preset to 5 °C.
With the optional remote control you can adjust the preset to 3 °C, 5 °C, 7 °C or
12 °C (fig. i, page 13). With each press of the button on the remote control, the
cooling temperature switches between the possible values:
1. Remove the plastic insulation from the battery holder before initial use.
✔ By pressing a button, a red LED illuminates on the remote control. If the red LED
does not illuminate, replace the batteries in the remote control.
2. Align the upper side of the remote control to the LEDs of the interior light (5).
Maintain a distance of less than 20 cm.
3. Press the yellow button (3) to set the cooling temperature to 3 °C or 7 °C.
✔ The LEDs of the interior light (5) flash three times or seven times, respectively, to
display the preset temperature (fig. i, page 13).
4. Press the blue button (4) to set the cooling temperature to 5 °C or 12 °C.
✔ The LEDs of the interior light (5) flash five times or twelve times, respectively, to
display the preset temperature (fig. i, page 13).
I
NOTE
8
The red LED illuminates as soon as a signal has been sent out. Check the
batteries if the LED does not illuminate.
8.7
Using the minibar
A
NOTICE!
Only store heavy objects such as bottles or cans on the bottom of the
minibar or in the door racks.
EN
Operation
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hipro4000Hipro4000visionHipro6000

Table of Contents