Enforced Spin Off - Stanley NB08PT-18 Instruction Manual

After changing, touch "Key" icon to fi x the
setting value and lock again.
After setting, touch "Home back" icon and
get back to counter screen.
*Please refer to Instruction Manual for
inserting a blind insert nut prior to placing.
7.3

ENFORCED SPIN OFF

When the tool cannot be being of from the
base material or the nut thread deformed
and stuck on the tool, enforced spin off can
be used.
Touch "Spin off " icon. The tool will operate to
reverse side in constant numbers.
FR lever also can be used to spin off .
Switch FR lever to "Enforced spin off " side.
Push the FR lever from right side to left side
from the tool front.
The power is turned OFF automatically.
Pull the trigger, the mandrel spins in reverse
rotation during pulling trigger.
After removal, switch FR lever to stroke
mode and pull trigger to turn on the power
again.
NB08PT-18
Locked
NB08PT-18
FR lever
29
PB2500Smart
Not Available
PB2500Smart
Not Available
Push
E N G L I S H