Attaching To The Camera - Canon WFT-E7 Instruction Manual

Attaching to the Camera

When connecting the transmitter to the camera, always use one of the
interface cables included with the transmitter.
GPS
WFT
Turn off both the transmitter and
1
camera.
Attach the transmitter's
2
<a> port cap.

Connect the transmitter and
3
CAMERA
camera.



Turn on both the transmitter and
4
camera.

Attach the cap for preventing cable
disconnection.
For the interface cable, use either
IFC-40AB III (40 cm / 1.3 ft.; sold
separately) or IFC-150AB III (1.5 m /
4.9 ft.; sold separately).
Attach the cable protector to the
camera and run the cable through the
clamp.
For cable protector instructions, refer
to the camera instruction manual.
The transmitter's <3> lamp will
light and <D> will be displayed on
the transmitter's LCD panel.
15