Installing And Removing The Battery - Canon WFT-E7 Instruction Manual

Installing and Removing the Battery

Use one Battery Pack LP-E6N (or LP-E6) to power the transmitter.
When replacing the transmitter's battery, be sure to turn the transmitter
off before opening the battery compartment cover.
Also note that the transmitter is not sold with a battery or charger. If you
do not own these accessories, they are available for purchase
separately.
Installing the Battery
12
Open the cover.
1
Push the lever down and open the

cover.
Insert the battery.
2
Insert the end with the battery

contacts.
Insert the battery all the way until it

locks into place.
Close the cover.
3
Press the cover up until it clicks into

place.