Using A Household Power Outlet - Canon WFT-E7 Instruction Manual

Using a Household Power Outlet

You can power the transmitter with a household power outlet by using
the DC Coupler DR-E6 and AC Adapter AC-E6N (each sold
separately).
DC coupler cord hole
Do not connect or disconnect the power cord or DC coupler while leaving

the transmitter's power switch set to the <1> position.
Do not connect both the transmitter and camera to a household power

outlet and use them simultaneously. It may cause malfunction to the
nearby electronic devices. For more information, contact your dealer or
nearest Canon Service Center.
AC Adapter Kit ACK-E6 (sold separately) can also be used.
14
Insert the DC coupler.
1
Open the battery compartment cover

and open the DC coupler cord hole
cover.
Insert the DC coupler securely until it

locks and put the cord through the
hole.
Close the cover.

Connect the DC coupler's plug.
2
Connect the DC coupler's plug and

the AC adapter's connector securely.
Connect the power cord.
3
Connect the power cord as shown in

the illustration.
After using the camera, unplug the

power plug from the power outlet.