Canon WFT-E7 Instruction Manual page 21

Select [Connection wizard].
5
 The <LAN> lamp on the transmitter
will blink in green.
Select the communication
6
method.
Select the communication method by

referring to page 18.
Select [OK] and press <0> to go

to the next screen.
Select the LAN type.
7
Select [OK] and press <0> to go

to the next screen.
When [Wireless] is selected
The [Select a network] screen is

displayed. For subsequent
operations, see page 22.
When [Wired] is selected
The [IP address set.] screen is

displayed. For subsequent
operations, see page 29.
Use a Category 5e or higher STP

LAN cable. (STP: Shielded Twisted
Pair)
Displaying the Connection Wizard
21