Installing the Battery
Use one lithium 2CR5 battery.
Attaching to the Camera
6
Remove the cover.
1
Slide the battery compartment cover
as shown by the arrow and remove.
Insert the battery.
2
Insert the battery as shown.
Close the cover.
3
Slide the cover back to its closed
position.
Slide the lever to the right.
1
Attach the ST-E2.
2
Slip the ST-E2's mounting foot into
the camera's hot shoe all the way.
Secure the ST-E2.
3
Slide the mounting foot's lock lever to
the left. The locking pin will then
protrude to secure the ST-E2 to the
camera.
To detach the ST-E2, slide the
mounting foot's lock lever to the right
and detach.