Canon WFT-E7 Instruction Manual page 27

Entering the Access Point Encryption Key
Enter the encryption key (password) specified for the access point.

For details on the specified encryption key, refer to the access
point's instruction manual.
The screens displayed in steps 2 to 3 below vary depending on the

authentication and encryption specified for the access point.
Go to page 29 when the [IP address set.] screen is displayed

instead of the screens for steps 2 to 3.
Connecting to a Detected Network Manually
Select a key index.
2
The [Key index] screen is displayed

only if WEP encryption is used by the
access point.
Select the key index number

specified for the access point, then
press <0>.
Select [OK] and press <0> to go

to the next screen.
Enter the encryption key.
3
Press <0> to display the virtual

keyboard (p.28), then enter the
encryption key.
When a connection with the access

point is established, the [IP address
set.] screen (p.29) is displayed.
27