Bluetooth Audio - Boss Cube Street II Owner's Manual

Wireless Connection with a Mobile Device
Attach the BT-DUAL (sold separately) to the CUBE STREET II to wirelessly
play back music on your mobile device, or to edit the effects of this unit
from the app on your mobile device.
* Note that the CUBE STREET II does not offer Bluetooth functionality.
You'll need to attach the BT-DUAL (sold separately) to use Bluetooth.
Attaching the BT-DUAL
Attach the BT-DUAL to the Bluetooth ADAPTOR connector of the
CUBE STREET II.
1.
Power down the CUBE STREET II and unplug the AC
adaptor from the AC outlet.
2.
Remove the cover and screw from the Bluetooth
ADAPTOR connector on the rear panel.
3.
Attach the BT-DUAL and fasten the screw that you
removed in step 2 in place.
NOTE
5 Be sure to use only the screw that was originally mounted on the
Bluetooth ADAPTOR connector. If you use a different screw, the unit
may malfunction.
5 Do not touch any of the printed circuit pathways or connection
terminals.
5 After you have attached the BT-DUAL, check again whether it is
properly installed.
Listening to Sound via Wireless
Connection with a Mobile Device
Bluetooth® Audio
With the CUBE STREET II, you can use Bluetooth audio functionality to
listen to music or music video played back on a mobile device through
this unit's speakers.
Registering a Mobile Device (Pairing)
"Pairing" involves registering the mobile device that you want to use with
the CUBE STREET II (making the two devices recognize each other).
Here we'll configure the settings so that music data saved on your mobile
device can be played wirelessly via the CUBE STREET II.
MEMO
The following explanation is only one example. For details, refer to
the owner's manual of your mobile device.
8
1.
Turn on the power of the CUBE STREET II.
2.
Place the mobile device that you want to connect close to
the CUBE STREET II.
3.
Hold down the pairing button on
the BT-DUAL until the Bluetooth
indicator blinks rapidly.
4.
Turn on the Bluetooth function of the
mobile device.
MEMO
This explanation uses the iPhone as an example. For details, refer to
the owner's manual of your mobile device.
5.
Tap "CUBE-ST2 Audio," shown on the Bluetooth device
screen of your mobile device.
This pairs the BT-DUAL with your mobile device. When pairing
succeeds, "CUBE-ST2 Audio" is added to the list of "Paired Devices"
on your mobile device.
* If you don't complete the pairing within a certain time, the
Bluetooth indicator goes dark and the unit exits pairing standby
mode.
Connecting an Already-Paired Mobile Device
1.
With the BT-DUAL's Bluetooth indicator off, press the
pairing button.
2.
Turn on the Bluetooth function of the mobile device.
MEMO
5 If you were unable to connect using the steps above, tap
"CUBE-ST2 Audio, " displayed in the Bluetooth device screen of the
mobile device.
5 To disconnect, press the pairing button on the BT-DUAL to make
the Bluetooth indicator go dark, or turn off the mobile device's
Bluetooth function.
Adjusting the Volume
1.
Adjust the volume on the mobile device.
Adjust the volume of Bluetooth audio.
2.
Turn the [i-CUBE LINK/AUX IN] knob on the
CUBE STREET II.
The [i-CUBE LINK/AUX IN] knob controls Bluetooth audio, the audio
of devices connected to the USB port, and the volume of audio
from mobile devices connected to the i-CUBE LINK/AUX IN jack.
When you turn the [i-CUBE LINK/AUX IN] knob, this controls both
the volume of Bluetooth audio and the volume of the devices
connected to each jack.
* This doesn't change the i-CUBE LINK OUT's volume.
Bluetooth indicator